Home :: EVO X Maintenance :: Evo X Brake Maintenance

Evo X Brake Maintenance

Products

Girodisc Front Caliper Dustboot Kit - EVO X
Been to a few too many track days? Didn't have our Titanium heat shields in behind your pads? Now your dust seals are cooked and you don't know what to do...well we can help! This kit is put together from all quality components to rebuild your caliper back to like new. One kit is required per caliper. Once you decide to do this, get the Ti shields as well and lengthen the time interval between rebuilds.

Fits: Lancer EVO X

Part# CDB1-047

Superseded to part# CDB1-008
$49.95
Qty
Girodisc Front Caliper Rebuild Kit - EVO X
Been to a few too many track days? Didn't have our Titanium heat shields in behind your pads? Now your dust seals are cooked and you don't know what to do...well we can help! This kit is put together from all quality components to rebuild your caliper back to like new. One kit is required per caliper. Once you decide to do this, get the Ti shields as well and lengthen the time interval between rebuilds. The shields are less than the seals! Dust boots and seals are available separately as well.

Fits: Lancer EVO X

Part# CCRK1-047
Superseded to part# CCRK1-008
$68.95
Qty
Girodisc Front Pad Shims - EVO X
Sometimes you try everything known to man to quiet down a set of brake pads but to no avail. Stubborn brake pad noise can require the addition of noise abatement shims to help quiet them down. These shims utilize the exact material used by many OEM's to absorb vibration and dampen noise. These shims have a highly slippery face and tabs on the edges to hold the shim in place during installation and use.

These can be a great help in providing noise free braking. NOT intended to quiet down race pads driven on the street!

Fits: Lancer EVO X

Part# PS1-047

Superseded to part# PS-1001
$49.95
Qty
Girodisc Front Titanium Pad Shields - EVO X
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk Steel 52 W/mk Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

Fits: Lancer EVO X

Part# TS1-047

Superseded to part# TS-1001-4
$95.00
Qty
Girodisc Rear Anti-Noise Shims - EVO X
Sometimes you try everything known to man to quiet down a set of brake pads but to no avail. Stubborn brake pad noise can require the addition of noise abatement shims to help quiet them down. These shims utilize the exact material used by many OEM's to absorb vibration and dampen noise. These shims have a highly slippery face and tabs on the edges to hold the shim in place during installation and use. These can be a great help in providing noise free braking. NOT intended to quiet down race pads driven on the street!

Fits: Lancer EVO X

Part# PS2-047

Superseded to part#PS-0961
$49.95
Qty
Girodisc Rear Caliper Dustboot Kit - EVO X
Been to a few too many track days? Didn't have our Titanium heat shields in behind your pads? Now your dust seals are cooked and you don't know what to do...well we can help! This kit is put together from all quality components to rebuild your caliper back to like new. One kit is required per caliper. Once you decide to do this, get the Ti shields as well and lengthen the time interval between rebuilds.

Fits: Lancer EVO X

Part# CDB2-047

Superseded to part#CDB2-008
$39.95
Qty
Girodisc Rear Caliper Rebuild Kit - EVO X
Been to a few too many track days? Didn't have our Titanium heat shields in behind your pads? Now your dust seals are cooked and you don't know what to do...well we can help! This kit is put together from all quality components to rebuild your caliper back to like new. One kit is required per caliper. Once you decide to do this, get the Ti shields as well and lengthen the time interval between rebuilds. The shields are less than the seals! Dust boots and seals are available separately as well.

Fits: Lancer EVO X

Part# CCRK2-047
$29.95
Qty
Girodisc Rear Titanium Pad Shields - EVO X
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool. The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings: Titanium 6AL-4V 6.7 W/mk Steel 52 W/mk Aluminum 130 W/mk You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive. Water jet cut to exact size, no cutting, grinding, or swearing involved. Price is per axle (four pieces)

Fits: Lancer EVO X

Part# TS2-047

Superseded to part# TS-0961-4
$105.00
Qty
Kozmic Motorsports Evo X Lightweight Bumper Bracket LH
The Texas Race Series Light Weight bumper brackets for the Mitsubishi Evo X weigh 50% of the OEM bracket, shedding valuable weight from the front of the car. This single bracket is a great compliment to our Evo X Catch Can kit (As shown in one of the above pictures, CCK not included). While you have the bumper off, installation of this additional bracket takes only a few minutes.

Fits: Evo X
$87.95
Qty
Mitsubishi OEM Brake Booster Body Seal - EVO 8/9/X
This is a genuine Mitsubishi OEM part!

Fits: EVO 8/9/X

Part # MB928711
$10.95
Qty
Mitsubishi OEM Brake Booster Nut - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MS440503
$1.95
Qty
Mitsubishi OEM Brake Booster Spacer - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4630A089
$17.95
Qty
Mitsubishi OEM Brake Booster Vacuum Check Valve - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# MB618176
$65.95
Qty
Mitsubishi OEM Brake Caliper Bleeder Cap - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4605A565
$10.95
Qty
Mitsubishi OEM Brake Fluid - EVO X
This is genuine Mitsubishi OEM fluid, the same DOT 3 brake fluid Mitsubishi put in your car from the factory!
$19.95
Qty
Mitsubishi OEM Brake Fluid Line Bracket - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A520
$5.95
Qty
Mitsubishi OEM Brake Fluid Line Clamp - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A527
$1.95
Qty
Mitsubishi OEM Brake Fluid Line Clip - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MN116232
$8.95
Qty
Mitsubishi OEM Brake Fluid Line Clip - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MB082164
$1.95
Qty
Mitsubishi OEM Brake Fluid Line Eyebolt - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MR249625
$4.95
Qty
Mitsubishi OEM Brake Fluid Line Grommet - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MN102851
$1.95
Qty
Mitsubishi OEM Brake Fluid Line Retaining Clip - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MR569334
$2.95
Qty
Mitsubishi OEM Brake Fluid Reservoir Filter - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4627A056
$14.95
Qty
Mitsubishi OEM Brake Fluid Reservoir Tank Cap - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part#: 4627A064
$16.95
Qty
Mitsubishi OEM Brake Fluid Type Label - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MB699160
$1.95
Qty
Mitsubishi OEM Brake Hydraulic Insulator - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MR235657
$8.95
Qty
Mitsubishi OEM Brake Hydraulic Unit Bracket - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4670A161
$35.95
Qty
Mitsubishi OEM Brake M/Cylinder Nut - EVO 8/9/X
This is a genuine Mitsubishi OEM part!

Fits: EVO 8/9/X

Part # ME747348
$7.95
Qty
Mitsubishi OEM Brake Master Cylinder Assembly - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4625A242
$567.95
Qty
Mitsubishi OEM Brake Master Cylinder Pin - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4625A098
$13.95
Qty
Mitsubishi OEM Brake Master Cylinder Seal - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4625A097
$9.95
Qty
Mitsubishi OEM Brake Master Cylinder Seal Kit - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4625A099
$47.95
Qty
Mitsubishi OEM Brake Modulator Hydraulic Unit - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4670A348
$2543.95
Qty
Mitsubishi OEM Brake Pedal Aluminum Pad - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4620A070
$49.95
Qty
Mitsubishi OEM Brake Pedal Assembly - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part#MN101624
$116.95
Qty
Mitsubishi OEM Brake Pedal Nut - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MU431014
$1.95
Qty
Mitsubishi OEM Brembo Brake Caliper Front Left - EVO X
Will come in handy if you jack up your stock brembo caliper.
$1477.95
Qty
Mitsubishi OEM Brembo Brake Caliper Front Right - EVO X
Will come in handy if you jack up your stock brembo caliper.
$1477.95
Qty
Mitsubishi OEM Brembo Brake Caliper Rear Left - EVO X
Will come in handy if you jack up your stock brembo caliper.
$1297.95
Qty
Mitsubishi OEM Brembo Brake Caliper Rear Right - EVO X
Will come in handy if you jack up your stock brembo caliper.
$1297.95
Qty
Mitsubishi OEM Front Brake Bolt - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4605A164
$2.95
Qty
Mitsubishi OEM Front Brake Caliper Bleeder - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4605A566
$14.95
Qty
Mitsubishi OEM Front Brake Caliper Pin - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4605A567
$26.95
Qty
Mitsubishi OEM Front Brake Caliper Seal Kit - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4605A571
$148.95
Qty
Mitsubishi OEM Front Brake Clip Set - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4605A570
$102.95
Qty
Mitsubishi OEM Front Brake Pad Anti-Squeak Spring - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# MR407363
$9.95
Qty
Mitsubishi OEM Front Brake Pin - EVO 8/9/X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# MB618227
$11.95
Qty
Mitsubishi OEM Front Brake Rotor Shield - Left - EVO 9/X
This is a genuine Mitsubishi OEM part! This part will protect against brake dust.

Fits: EVO 9/X

Part # 4605A531
$34.95
Qty
Mitsubishi OEM Front Brake Rotor Shield - Right - EVO 9/X
This is a genuine Mitsubishi OEM part! This will protect against brake dust.

Fits: EVO 9/X

Part # 4605A532
$34.95
Qty
Mitsubishi OEM Front Brake Tube - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A525
$25.95
Qty
Mitsubishi OEM Front Brake Tube - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A526
$12.95
Qty
Mitsubishi OEM Front Right ABS Sensor - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4670A204
$276.95
Qty
Mitsubishi OEM Front Right Brake Hose - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A341
$29.95
Qty
Mitsubishi OEM Front Right Brake Hose - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A342
$29.95
Qty
Mitsubishi OEM Front Rotors - EVO X GSR
Genuine OEM Mitsubishi, NO local parts store rebuild here! Price is for a set of 2

Fits: Lancer Evolution X GSR

Part# 4615A024
$535.95
Qty
Mitsubishi OEM Front Rotors - EVO X MR
Genuine OEM Mitsubishi, NO local parts store rebuild here! Price is for set of 2

Fits: Lancer Evolution X MR

Part# 4615A023
$1372.95
Qty
Mitsubishi OEM Left Brake Hose Bracket - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A343
$10.95
Qty
Mitsubishi OEM Left Brake Main Tube - EVO X
This is a genuine OEM Mitsubishi part!

Fits: Lancer EVO X

Part# 4650A363
$51.95
Qty
Mitsubishi OEM Left Front ABS Sensor - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4670A577
$287.95
Qty
Mitsubishi OEM Left Front Brake Disc Cover - EVO X
Genuine OEM Mitsubishi, NO local parts store rebuild here!

Fits: Lancer Evolution X

Part# 4605A203
$26.95
Qty

Today's Bestsellers