0
item(s)
Cart is empty
ETS Turbo Back Exhaust - 2008-2015 EVO X
SKU: ETS-EVO-X-Turbo-Back-Exhaust
This is a full turbo back exhaust. This Exhaust Includes:
ETS Downpipe:
The ETS Evolution X O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a recirculated or Atmospheric wastegate dump for people wanting a stock like sound under wide open throttle or a loud open exhaust sound. This downpipe has been engineered to be one of the highest flowing downpipes on the market with a CNC tapered flange that matches the turbine outlet perfectly.
Features:
Split Wastegate and Exhaust Design
Includes 1 studs and 1 nuts for easy install ( Reuse factory studs )
Includes Gasket for a perfect seal
Factory o2 sensor location
Wideband bung w/ Plug Included
CNC flange matches the turbine housing perfectly for the smoothest flow possible.
Weight: 10lbs
ETS Test pipe:
The ETS Evolution X Test Pipe is a direct replacement of the factory catalytic pipe. This has been dyno tested for a 25whp increase over the factory catalytic pipe. Works with factory downpipe and factory exhaust system as well as any other aftermarket exhaust system that mounts in the factory location.
Features:
Direct Replacement J-Pipe O2 Bung (Prevents Check Engine Lights)
Optional Wideband o2 bung
Stainless Steel
Factory bend to clear the driveshaft unlike the competitors who use a straight pipe that will rub against the driveshaft.
ETS Cat back Exhaust:
Choose from 1 of ETS's ETS Quiet, V2, Extreme or our 3.0" Single Exit Exhaust.
The ETS Quiet Exhaust system is a direct replacement of the factory cat back. This exhaust system features a large muffler similar to stock which results in a quiet exhaust system without the added back pressure from the restrictive factory cat back. This is one of the highest flowing exhaust systems on the market while maintaining everyday drivability.
The ETS V2 Exhaust system is 100% stainless steel and made right here at our facility! The exhaust system features a 3.0" mid pipe that tucks up tightly against the underside of the vehicle giving you more ground clearance then any other exhaust on the market. The mid pipe connects to the muffler section using a 3.0" v-band connection. The v-band connection provides a leak free seal and allows for a quick change race pipe for the drag strip! The muffler section consist of two straight through resonators that route into two 4.0" round stainless steel tips. Each tip is centered perfectly in the bumper opening.
The ETS Mitsubishi Evo X Extreme Exhaust System is a direct replacement of the factory cat back exhaust system. This exhaust was designed for the true enthusiast looking for maximum performance with no mufflers or restrictions in the complete exhaust system. This is one of the loudest exhaust systems on the market. This exhaust system is 100% stainless steel and made right here at our facility. The exhaust system features a 3.0" mid pipe that tucks up tightly against the underside of the vehicle giving you more ground clearance then any other exhaust on the market. The mid pipe connects to the rear section using a 3.0" v-band connection. The v-band connection provides a leak free seal and allows for a quick change race pipe for the drag strip! Each tip is centered perfectly in the bumper opening.
The ETS Single Exit Exhaust System is a factory replacement for the factory cat back exhaust system. This exhaust system is designed for the true performance enthusiast looking for a light weight exhaust system with a single exit and with piping diameter ranging from 3.0" to 3.5" this exhaust will handle any amount of horsepower you can throw at it.
Quiet Exhaust Features:
Full Stainless Steel
3.0" Diameter
Large Straight Through Muffler Design
3" Inlet & 2x 2.5" (3.53") Outlets Muffler
V-band Clamp
Perfectly Centered Tips
Stock Mounting Location
Includes All Hardware
V2 Features:
Full Stainless Steel
3.0" Diameter
2x - 3.0" Straight Through Resonators
V-band Clamp
Perfectly Centered Tips
Stock Mounting Location
Includes All Hardware
Extreme Features:
Full 3" Manderal Bent Stainless Steel Piping
27lbs
3" V-Band
No Mufflers
Single Exit Features:
3.0" Single Exit
Stainless Steel Construction
Direct Replacement
*Note: If using a stock catalytic converter select the adapter flange in the drop downs below.
This is a full turbo back exhaust. This Exhaust Includes:
ETS Downpipe:
The ETS Evolution X O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a recirculated or Atmospheric wastegate dump for people wanting a stock like sound under wide open throttle or a loud open exhaust sound. This downpipe has been engineered to be one of the highest flowing downpipes on the market with a CNC tapered flange that matches the turbine outlet perfectly.
Features:
Split Wastegate and Exhaust Design
Includes 1 studs and 1 nuts for easy install ( Reuse factory studs )
Includes Gasket for a perfect seal
Factory o2 sensor location
Wideband bung w/ Plug Included
CNC flange matches the turbine housing perfectly for the smoothest flow possible.
Weight: 10lbs
ETS Test pipe:
The ETS Evolution X Test Pipe is a direct replacement of the factory catalytic pipe. This has been dyno tested for a 25whp increase over the factory catalytic pipe. Works with factory downpipe and factory exhaust system as well as any other aftermarket exhaust system that mounts in the factory location.
Features:
Direct Replacement J-Pipe O2 Bung (Prevents Check Engine Lights)
Optional Wideband o2 bung
Stainless Steel
Factory bend to clear the driveshaft unlike the competitors who use a straight pipe that will rub against the driveshaft.
ETS Cat back Exhaust:
Choose from 1 of ETS's ETS Quiet, V2, Extreme or our 3.0" Single Exit Exhaust.
The ETS Quiet Exhaust system is a direct replacement of the factory cat back. This exhaust system features a large muffler similar to stock which results in a quiet exhaust system without the added back pressure from the restrictive factory cat back. This is one of the highest flowing exhaust systems on the market while maintaining everyday drivability.
The ETS V2 Exhaust system is 100% stainless steel and made right here at our facility! The exhaust system features a 3.0" mid pipe that tucks up tightly against the underside of the vehicle giving you more ground clearance then any other exhaust on the market. The mid pipe connects to the muffler section using a 3.0" v-band connection. The v-band connection provides a leak free seal and allows for a quick change race pipe for the drag strip! The muffler section consist of two straight through resonators that route into two 4.0" round stainless steel tips. Each tip is centered perfectly in the bumper opening.
The ETS Mitsubishi Evo X Extreme Exhaust System is a direct replacement of the factory cat back exhaust system. This exhaust was designed for the true enthusiast looking for maximum performance with no mufflers or restrictions in the complete exhaust system. This is one of the loudest exhaust systems on the market. This exhaust system is 100% stainless steel and made right here at our facility. The exhaust system features a 3.0" mid pipe that tucks up tightly against the underside of the vehicle giving you more ground clearance then any other exhaust on the market. The mid pipe connects to the rear section using a 3.0" v-band connection. The v-band connection provides a leak free seal and allows for a quick change race pipe for the drag strip! Each tip is centered perfectly in the bumper opening.
The ETS Single Exit Exhaust System is a factory replacement for the factory cat back exhaust system. This exhaust system is designed for the true performance enthusiast looking for a light weight exhaust system with a single exit and with piping diameter ranging from 3.0" to 3.5" this exhaust will handle any amount of horsepower you can throw at it.
Quiet Exhaust Features:
Full Stainless Steel
3.0" Diameter
Large Straight Through Muffler Design
3" Inlet & 2x 2.5" (3.53") Outlets Muffler
V-band Clamp
Perfectly Centered Tips
Stock Mounting Location
Includes All Hardware
V2 Features:
Full Stainless Steel
3.0" Diameter
2x - 3.0" Straight Through Resonators
V-band Clamp
Perfectly Centered Tips
Stock Mounting Location
Includes All Hardware
Extreme Features:
Full 3" Manderal Bent Stainless Steel Piping
27lbs
3" V-Band
No Mufflers
Single Exit Features:
3.0" Single Exit
Stainless Steel Construction
Direct Replacement
*Note: If using a stock catalytic converter select the adapter flange in the drop downs below.
