Home- EVO X Exhaust
- EVO X Intake
- EVO X Intercooler
- EVO X Turbo
- EVO X Engine Parts
- EVO X Fuel
- EVO X Blow off Valve
- EVO X Body Kits / Exterior
- EVO X Boost Controller
- EVO X Suspension
- EVO X Brakes
- EVO X Clutch / Transmission
- EVO X Interior
- EVO X Gauge Pod / Gauges
- EVO X Rims
- EVO X Maintenance
- EVO X Turbo Timer
- Clearance Sale >>
Home
::
Today's Bestsellers
Clearance Sale >>
Made from high quality 2x2 weave carbon fiber with clear coat finish.
Utilizes factory mounting location for easy install.
We can also paint the hood scoop for you in matching OEM color.
Available in CF or Painted version, check the pull-down menu to select.
$195.00
Made from dry carbon with clear coat finish.
Comes with adhesive tape for easy install.
These are a perfect match and compliments our center carbon dash trim pieces
that is also available through our website.
Sold in pairs
For Evo X (CZ4A) models.
Comes with adhesive tape for easy install.
These are a perfect match and compliments our center carbon dash trim pieces
that is also available through our website.
Sold in pairs
For Evo X (CZ4A) models.
$245.00
Spoiler is just like our regular painted version except it comes with extra carbon
strip from end to end to give it that extra race look.
Trunk spoiler is made from high quality FRP w/ OEM paint.
Check the pull-down menu to select.
Please note that we use fac...
strip from end to end to give it that extra race look.
Trunk spoiler is made from high quality FRP w/ OEM paint.
Check the pull-down menu to select.
Please note that we use fac...
$230.00
If you are looking to replace your factory wing this Duckbill trunk spoiler is the
answer.
Sleek and aggressive low profile look that will not attract too much attention
especially from the police.
Trunk spoiler is made from high quality FRP w/ OEM paint.
<...
answer.
Sleek and aggressive low profile look that will not attract too much attention
especially from the police.
Trunk spoiler is made from high quality FRP w/ OEM paint.
<...
$210.00
If you are looking to replace your factory wing this Duckbill trunk spoiler is the
answer.
Sleek and aggressive low profile look that will not attract too much attention
especially from the police.
Made from high quality twill weave carbon fiber with clear coat fin...
answer.
Sleek and aggressive low profile look that will not attract too much attention
especially from the police.
Made from high quality twill weave carbon fiber with clear coat fin...
$250.00
Each carbon duct is made from high grade twill weave carbon fiber with
clear coat finish.
Kit includes mesh grill and mounting hardware for easy installation.
For Evo X without the OEM/factory Aero kit.
If you have V-style front splitter these WILL NOT be compatible.
clear coat finish.
Kit includes mesh grill and mounting hardware for easy installation.
For Evo X without the OEM/factory Aero kit.
If you have V-style front splitter these WILL NOT be compatible.
$240.00
Made from real carbon fiber with clear coat finish.
The heat shield will protect your bumper from turning black due to high
exhaust temperatures.
These come predrilled and includes rivets for installation.
Sold in pairs.
For Evo X (CZ4A) only.
The heat shield will protect your bumper from turning black due to high
exhaust temperatures.
These come predrilled and includes rivets for installation.
Sold in pairs.
For Evo X (CZ4A) only.
$133.00
**Please read description carefully before you place order to insure you choose
the correct item for your vehicle.
**Please make sure your car roof is flat, if it has 2 bumps at both ends, please
check the product here:
R124
Made from high grade twill ...
the correct item for your vehicle.
**Please make sure your car roof is flat, if it has 2 bumps at both ends, please
check the product here:
R124
Made from high grade twill ...
$290.00
**Please read description carefully before you place order to insure you choose
the correct item for your vehicle.
**Please make sure your car roof is flat, if it has 2 bumps at both ends, please
check the product here:
R124
Made from high grade twill ...
the correct item for your vehicle.
**Please make sure your car roof is flat, if it has 2 bumps at both ends, please
check the product here:
R124
Made from high grade twill ...
$290.00
Made from high quality FRP.
Attaches to the rear corners of your factory bumper for enhance appearance.
Utilizes existing OEM mounting locations for easy installation.
Check the pull-down menu to select the color you'd like.
Please note that ...
$171.00
Gauge pod is available in 52mm but can be modified to fit 60mm gauge
as well by sanding the opening larger with a dremel or piece of sandpaper,
will only takes a few minutes.
Kit comes with 3M adhesives for easy install.
For LHD Evo X (CZ4A) and Ralliart models.
as well by sanding the opening larger with a dremel or piece of sandpaper,
will only takes a few minutes.
Kit comes with 3M adhesives for easy install.
For LHD Evo X (CZ4A) and Ralliart models.
$128.00
**Please read description carefully before you place order to insure you choose
the correct item for your vehicle. **
This vortex generator will only fit roofs that are FLAT.
If you have bumps at both ends of car roof, check:
R176
...
$175.00
Made from pre-preg dry carbon with clear coat finish.
Dress up your engine bay with this new trick looking carbon cover.
For Evo X (CZ4A) models.
Dress up your engine bay with this new trick looking carbon cover.
For Evo X (CZ4A) models.
$300.00
Direct bolt on item replaces factory intake.
Made from high grade carbon fiber.
Works with our carbon radiator panel.
Available in 2x2 or 1x1 weaves, please check the pull-down menu to select.
For Evo X (CZ4A) models.
Made from high grade carbon fiber.
Works with our carbon radiator panel.
Available in 2x2 or 1x1 weaves, please check the pull-down menu to select.
For Evo X (CZ4A) models.
$211.00
The gurney flap creates 14kg more down force at speeds above 180km.
These are OEM style gurney flaps made from ABS plastic.
Comes painted and includes 3M adhesive, check the pull-down menu to select
the color you'd like.
Please note that we use factory pain...
These are OEM style gurney flaps made from ABS plastic.
Comes painted and includes 3M adhesive, check the pull-down menu to select
the color you'd like.
Please note that we use factory pain...
$49.00
High Grade Twill Weave Carbon Bonnet Vents.
Direct OEM replacements.
Sold in pairs.
For Evo X (CZ4A) only.
Direct OEM replacements.
Sold in pairs.
For Evo X (CZ4A) only.
$165.00
Made from FRP material includes 3M adhesives for simple install.
Check the pull-down menu to select the color you'd like.
Please note that we use factory paint on our product, but even with OEM paint,
the color of the painted product is impossible to match the OEM paint o...
Check the pull-down menu to select the color you'd like.
Please note that we use factory paint on our product, but even with OEM paint,
the color of the painted product is impossible to match the OEM paint o...
$166.00
Made from high quality carbon fiber with clear coat finish.
The CF bracket is a direct swap from the plastic factory piece.
Utilizes factory screws and mounting locations for an easy install.
Available in twill weave carbon fiber.
For Evo X (CZ4A) only.
The CF bracket is a direct swap from the plastic factory piece.
Utilizes factory screws and mounting locations for an easy install.
Available in twill weave carbon fiber.
For Evo X (CZ4A) only.
$119.00
Carbon fiber radiator panels replaces factory unit.
Direct bolt on item works with our CF intake.
Available in 2x2 or 1x1 weaves, check the pull-down menu to select.
For Evo X (CZ4A) models.
Direct bolt on item works with our CF intake.
Available in 2x2 or 1x1 weaves, check the pull-down menu to select.
For Evo X (CZ4A) models.
$385.00
Each lip is made from high quality carbon fiber with clear coat finish.
Each individual carbon lip has been test fitted so our customers do not have to
worry about fitment issues.
Comes with all necessary hardware for a complete install.
For Evo X (CZ4A)...
Each individual carbon lip has been test fitted so our customers do not have to
worry about fitment issues.
Comes with all necessary hardware for a complete install.
For Evo X (CZ4A)...
$540.00
Made from high quality real carbon fiber with clear coat finish.
Includes mounting hardware for easy installation.
A nice add on piece for your rear bumper.
For Evo X (CZ4A) only.
Includes mounting hardware for easy installation.
A nice add on piece for your rear bumper.
For Evo X (CZ4A) only.
$170.00
Gauge pod is available in 52mm but can be modified to fit 60mm gauges.
For RHD Evo X (CZ4A) only.
For RHD Evo X (CZ4A) only.
$127.00
Made from high quality carbon fiber with clear coat finish.
Enhance your evo's look with a pair of these side skirt extensions and stand
out from the crowd.
Each kit comes with necessary hardware for install.
Sold in pairs
For All Evo X models with o...
Enhance your evo's look with a pair of these side skirt extensions and stand
out from the crowd.
Each kit comes with necessary hardware for install.
Sold in pairs
For All Evo X models with o...
$433.00
Made from high quality carbon fiber.
The side spats are made to fit Mitsubishi OEM aero kits only.
Kit includes mounting screws and 3M adhesives for easy 10 minute install.
For EVO X OEM/factory optional skirts Only.
The side spats are made to fit Mitsubishi OEM aero kits only.
Kit includes mounting screws and 3M adhesives for easy 10 minute install.
For EVO X OEM/factory optional skirts Only.
$165.00
**Please read description carefully before you place order to insure you choose
the correct item for your vehicle.
For the EVO X with bumps at both ends of the car roof, if not, please check the
product here:
R155
Made from high gra...
$290.00
**Please read description carefully before you place order to insure you choose
the correct item for your vehicle. **
This vortex generator will only fit roofs that are FLAT.
If you have bumps at both ends of car roof, check:
R176
Made fr...
$175.00
Made from high grade 2x2 carbon weave with clear coat finish.
Includes 3M adhesives for easy 2 mins install.
For 2008~2010 Evo X SST models only.
Includes 3M adhesives for easy 2 mins install.
For 2008~2010 Evo X SST models only.
$133.00
Gauge pod comes in 52mm but can be modified to fit 60mm gauges as well
by sanding the opening larger with a dremel or sandpaper, will only takes a
few minutes.
Kit comes with 3M adhesives for easy install.
For Evo X (CZ4A) and Ralliart models.
by sanding the opening larger with a dremel or sandpaper, will only takes a
few minutes.
Kit comes with 3M adhesives for easy install.
For Evo X (CZ4A) and Ralliart models.
$128.00
Gauge pod comes in 52mm but can be modified to fit 60mm gauges as well
by sanding the opening larger with a dremel or sandpaper, will only takes
a few minutes.
Kit comes with 3M adhesives for easy install.
For Evo X (CZ4A) and Ralliart models.
by sanding the opening larger with a dremel or sandpaper, will only takes
a few minutes.
Kit comes with 3M adhesives for easy install.
For Evo X (CZ4A) and Ralliart models.
$121.00
The test pipe is full 3″ stainless steel with thick flanges and includes the
O2 sensor location.
Test pipe will help spool your turbo faster increasing boost and horsepower.
A must have to maximize exhaust flow that is needed on a turbo charged car.
Expect an...
O2 sensor location.
Test pipe will help spool your turbo faster increasing boost and horsepower.
A must have to maximize exhaust flow that is needed on a turbo charged car.
Expect an...
$184.00
High Grade Twill Weave Carbon Bonnet Vents.
Direct OEM replacement includes mesh grills.
Sold in pairs.
For Evo X (CZ4A) only.
Direct OEM replacement includes mesh grills.
Sold in pairs.
For Evo X (CZ4A) only.
$183.00
Evo X trunk spoiler is made from high quality carbon fiber with clear coat finish.
Kit includes 3M adhesives for easy installation.
Made to fit with or without the factory wing.
Great mod for those who want to go wingless anytime!
For Evo X, RA and Lancer ...
Kit includes 3M adhesives for easy installation.
Made to fit with or without the factory wing.
Great mod for those who want to go wingless anytime!
For Evo X, RA and Lancer ...
$185.00
Made from high quality carbon fiber with clear coat finish.
Enhance your evo's look with a pair of these side skirt extensions and stand out
from the crowd.
Each kit comes with necessary hardware for install.
Sold in pairs
For All Evo X models ...
Enhance your evo's look with a pair of these side skirt extensions and stand out
from the crowd.
Each kit comes with necessary hardware for install.
Sold in pairs
For All Evo X models ...
$433.00
The trunk spoiler utilizes factory mounting holes for install and is a direct swap
from the factor wing with no modifications needed.
Includes mounting screws for an easy install.
Available in carbon fiber finish or paint color, check the pull-down menu to select.
...
from the factor wing with no modifications needed.
Includes mounting screws for an easy install.
Available in carbon fiber finish or paint color, check the pull-down menu to select.
...
$340.00
The trunk spoiler utilizes factory mounting holes for install and is a direct swap
from the factor wing with no modifications needed.
Includes mounting screws for an easy install.
Available in carbon fiber finish or paint color, check the pull-down menu to select.
...
from the factor wing with no modifications needed.
Includes mounting screws for an easy install.
Available in carbon fiber finish or paint color, check the pull-down menu to select.
...
$340.00
Made from twill weave carbon fiber and utilizes OEM mounting locations for
easy install.
This is a full factory replacement but in carbon fiber.
Nice add on carbon piece that replaces the dull looking factory splitter.
For Evo X (CZ4A) only.
easy install.
This is a full factory replacement but in carbon fiber.
Nice add on carbon piece that replaces the dull looking factory splitter.
For Evo X (CZ4A) only.
$310.00
Made from high quality 2x2 carbon fiber weave.
Canards are wrapped in carbon fiber on both top and bottom portions.
Kit includes 4 canard pieces and comes with mounting hardware.
For Evo X (CZ4A) only.
Canards are wrapped in carbon fiber on both top and bottom portions.
Kit includes 4 canard pieces and comes with mounting hardware.
For Evo X (CZ4A) only.
$210.00
Each lip is made from high quality carbon fiber with clear coat finish.
Each individual carbon lip has been test fitted so our customers do not have to
worry about fitment issues.
Comes with all necessary hardware for a complete install.
For Evo X (CZ4A) ...
Each individual carbon lip has been test fitted so our customers do not have to
worry about fitment issues.
Comes with all necessary hardware for a complete install.
For Evo X (CZ4A) ...
$540.00
Made from high grade twill weave carbon fiber with excellent fitment.
Each kit comes with necessary hardware and instructions for complete install.
Diffusers not only adds style to your car but helps reduce air turbulence during
high-speed runs.
For Evo X (C...
Each kit comes with necessary hardware and instructions for complete install.
Diffusers not only adds style to your car but helps reduce air turbulence during
high-speed runs.
For Evo X (C...
$766.00
Comes with blue tinted mirrors and all necessary hardware for a complete install.
Please check the pull-down menu to select the
Car Model / LHD or RHD / Materials (Carbon or Painted) you'd like.
If you'd like to paint a different color with your mirror bases, le...
Please check the pull-down menu to select the
Car Model / LHD or RHD / Materials (Carbon or Painted) you'd like.
If you'd like to paint a different color with your mirror bases, le...
$219.00
Comes with blue tinted mirrors and all necessary hardware for a complete install.
Please check the pull-down menu to select the
Car Model / LHD or RHD / Materials (Carbon or Painted) you'd like.
If you'd like to paint a different color with your mirror bases, le...
Please check the pull-down menu to select the
Car Model / LHD or RHD / Materials (Carbon or Painted) you'd like.
If you'd like to paint a different color with your mirror bases, le...
$400.00
Comes with blue tinted mirrors and all necessary hardware for a complete install.
Please check the pull-down menu to select the
Car Model / LHD or RHD / Materials (Carbon or Painted) you'd like.
If you'd like to paint a different color with your mirror bases, le...
Please check the pull-down menu to select the
Car Model / LHD or RHD / Materials (Carbon or Painted) you'd like.
If you'd like to paint a different color with your mirror bases, le...
$219.00
The Hallman EVOLUTION is integrated into a self-contained cockpit controller cable system.
The self contained cable system allows you to adjust boost from inside your car!
This new system makes it very easy to set initial desired boost level... there is no need to s...
The self contained cable system allows you to adjust boost from inside your car!
This new system makes it very easy to set initial desired boost level... there is no need to s...
$165.00
-Increase Downforce
-More Aggressive look
-High Quality Twill Weave Carbon Fiber with clear coat finish.
-Kits comes with all necessary hardware for complete install.
-Trimming of diffuser may be needed depending on the exhaust brand.
For JDM Evo 7~8 models only
-More Aggressive look
-High Quality Twill Weave Carbon Fiber with clear coat finish.
-Kits comes with all necessary hardware for complete install.
-Trimming of diffuser may be needed depending on the exhaust brand.
For JDM Evo 7~8 models only
$711.00
If your looking for a clean aggressive diffuser for your JDM 9 bumper, this is it.
Diffusers not only adds style to your car but helps reduce air turbulence during
high speed runs which in turn increases stability to the car.
Kit includes all 3 carbon pieces.
Diffusers not only adds style to your car but helps reduce air turbulence during
high speed runs which in turn increases stability to the car.
Kit includes all 3 carbon pieces.
$770.00
Each diffuser is made from high quality carbon fiber with clear coat finish.
Kit comes with all necessary hardware for complete install.
For JDM Evo 9 Only.
Kit comes with all necessary hardware for complete install.
For JDM Evo 9 Only.
$766.00
Made to fit JDM Evo 7 and 8 bumpers only.
Kit comes with mounting bracket and all necessary hardware for a complete
install.
Factory bumper needs to be trimmed in order for the diffuser to fit.
For JDM Evo 7~8 Models Only.
Kit comes with mounting bracket and all necessary hardware for a complete
install.
Factory bumper needs to be trimmed in order for the diffuser to fit.
For JDM Evo 7~8 Models Only.
$483.00
These mirrors are power operated.
Available for LHD or RHD, with or without LED markers
and painted or Carbon Fiber version, check the pull-down menu to select the
combination you'd like.
Comes with blue tinted mirrors and all necessary hardware for a ...
$219.00
One of the most important aspects of racing is knowing exactly what
your Evo is doing at all times!
You need to have the most accurate measurements for all the variables that your car is going through to maintain, tune and most importantly to know your car is operating at a ...
You need to have the most accurate measurements for all the variables that your car is going through to maintain, tune and most importantly to know your car is operating at a ...
Regular price: $57.95
save 48%
$29.95
One of the most overlooked aspects of any vehicle is the EGT.
The EGT (Exhaust Gas Temperature) is extremely important to performance tuning as it can give you the tell-tale signs of premature failure in your engine and exhaust parts.
Being able to tell if you ...
$99.95
The gurney flap creates 14kg more down force at speeds above 180km.
These are OEM style gurney flaps made from ABS plastic.
Comes painted and includes 3M adhesive to install.
Check the pull-down menu to select the color you'd like.
Please note that we use f...
These are OEM style gurney flaps made from ABS plastic.
Comes painted and includes 3M adhesive to install.
Check the pull-down menu to select the color you'd like.
Please note that we use f...
$49.00
Made from high quality carbon fiber.
Comes with blue tinted mirrors and all necessary hardware for a complete install.
Mirror is manual NOT automatic.
For Evo 7~9 (CT9A) models.
Comes with blue tinted mirrors and all necessary hardware for a complete install.
Mirror is manual NOT automatic.
For Evo 7~9 (CT9A) models.
$295.00
Each lip is made from high quality carbon fiber with clear coat finish.
No drilling or modifications needed
Comes with all necessary hardware for a complete install.
For Evo 9 Only.
No drilling or modifications needed
Comes with all necessary hardware for a complete install.
For Evo 9 Only.
$466.00
Each carbon fiber side spat comes with high gloss clear coat finish.
Gives your Evo a distinctive look and also protects your paint from rock chips.
Includes 3M adhesive and are predrilled for a easy install.
No modifications needed to install the side spats.
Gives your Evo a distinctive look and also protects your paint from rock chips.
Includes 3M adhesive and are predrilled for a easy install.
No modifications needed to install the side spats.
$150.00
Made from real carbon fiber with clear coat finish.
These pods go over your factory steering wheel cover not replacements and
are held on with 3M adhesives.
Pod fits 52mm gauges.
For Evo 7~9 (CT9A) models.
These pods go over your factory steering wheel cover not replacements and
are held on with 3M adhesives.
Pod fits 52mm gauges.
For Evo 7~9 (CT9A) models.
$132.00
Made from real carbon fiber with clear coat finish.
The pod goes over your factory steering wheel cover not replacements and
are held on with 3M adhesives.
Pod fits 52mm gauges.
For Evo 7~9 (CT9A) models.
The pod goes over your factory steering wheel cover not replacements and
are held on with 3M adhesives.
Pod fits 52mm gauges.
For Evo 7~9 (CT9A) models.
$121.00
Made from ABS plastic.
Each pod comes painted to match the Evo interior.
Includes 3M adhesives.
Pod comes precut in 52mm size but can be trimmed to fit 60mm gauges.
For Evo 7~9 (CT9A) models.
Each pod comes painted to match the Evo interior.
Includes 3M adhesives.
Pod comes precut in 52mm size but can be trimmed to fit 60mm gauges.
For Evo 7~9 (CT9A) models.
$69.00
If you turbo has gotten you into as much trouble as mine has, you got to have
one of these keychains. Or get one as a gift for that friend that can't keep
his/her foot off the pedal =)
$7.99
$7.99
INFORMATION
CUSTOMER SERVICE
MY ACCOUNT
CONTACT US
-
ADDRESS:
EVO X PARTS
2363 James St 644, Syracuse
13206-2840, New York
United States -
TELEPHONE:
7735375249 -
EMAIL
Contact Us
Powered by Lumino
Copyright © 2002-2025 EVO X PARTS
Copyright © 2002-2025 EVO X PARTS