|
Today's Bestsellers
Product Details
|
AGP Valve Cover Breather- EVO X
AGP Valve Cover Breather- EVO X
Part # AGP-EVOX-BREATHER
Instead of venting your oil vapors back into the intake system, reroute into one of our professionally constructed and fully tig welded breather systems. Using the same filtering media as our popular Oil Accumu...
Sale Price: $172.95
|
Product Details
|
AMS Small Battery Tray - EVO X
AMS introduces the EVO X Small battery tray.
This very easy to install piece will allow you to remove you heavy stock battery and mount a lightweight race battery on its side to not only lower the overall weight of the car but also lower the center of gravity. This easy to install pi...
Sale Price: $59.95
|
Product Details
|
BaySpeed Evo X GM Carbon Fiber Intake Snorkel
All Aero Dynamic kits are made out of a high quality plastic-fiber glass or poly-urethane and comes with wire mesh grill if applicable. The Bay speed plastic-fiber glass or poly-urethane structure provides maximum stability and flexibility to the aero kit allowing for a great custom fitment.
Sale Price: $819.95
|
Product Details
|
Beatrush Oil-Air Separator Catch Tank - EVO X
The Beatrush Oil-Air Separator Catch Tank for Evolution X removes the
oil from the engine ventilation system so the oil does not get sent
through the intake system; while reducing pressure inside the crankcase
through discharged gases released through the oil cap. Overall, this
prov...
Sale Price: $384.75
|
Product Details
|
Dress Up Bolts Stainless Engine Kit - EVO X
The Stainless Series is a great affordable alternative for those that do not wish to have a colored fastener. The Stainless Series is constructed of Grade 8 304 Stainless Steel and is a great addition to any engine bay. The Stainless Series features our Signature Head design for a truly custom lo...
Sale Price: $55.95
|
Product Details
|
Dress Up Bolts Titanium Engine Bay Kit - 08+ EVO X
Take pride in your engine bay or engine? It’s time to take it to the next level with a Titanium Series Dress Up Kit for your engine bay and engine! These kits are a complete replacement for most visible bolts and nuts on your specific vehicle’s engine bay, ready to bolt in as soon as they arrive....
Sale Price: $266.95
|
Product Details
|
Dress Up Bolts Titanium Engine Kit - 08+ EVO X
Take pride in your engine bay or engine? It’s time to take it to the next level with a Titanium Series Dress Up Kit for your engine bay and engine! These kits are a complete replacement for most visible bolts and nuts on your specific vehicle’s engine bay, ready to bolt in as soon as they arrive....
Sale Price: $120.95
|
Product Details
|
Forge Oil Catch Tank for Intake Manifold System - EVO X
The Evo X has a traditional style of breather system, that being a pipe joining the airfilter to the rear of the cam cover and a pipe joining the cam cover to the inlet manifold via a PCV mounted in the cover itself. At idle and cruise, the PCV opens and blow by gases are drawn from the cam cover...
Sale Price: $486.00
|
Product Details
|
Forge Oil Catch Tank for Turbo Intake System - EVO X
When the turbo is making boost (anything above atmospheric pressure, so even very small amounts of boost) the PCV closes to save pressurising the cam cover, but the volume of blow by gases increases as the engine is working harder. The oil mist is now drawn out and into the inlet of the turbo. Af...
Sale Price: $486.00
|
Product Details
|
Greddy Hood Damper Kit - EVO X
GReddy Carbon Hood Damper Kits are carefully designed for each specific
OEM hood application. The high-end Carbon Damper and the locking ball
joint / cup mounts allow for smooth opening and closing operation.
Installation is also made very easy with English instructions and
labeled mounts...
Sale Price: $321.95
|
Product Details
|
GSC Evo X Viton Valve Stem Seal Kit
GSC Power-Division Viton® Valve Stem Seals use genuine DuPont Viton® fluoroelastomer material. Viton® was specifically developed for the extreme conditions seen in today’s high horsepower, sport compact engines. Held to a higher standard, GSC Power-Division Viton® valve seals provide improv...
Sale Price: $63.95
|
Product Details
|
JM Fab EVO X 4B11 Aluminum Torque Plate
JM Fab EVO X 4B11 Aluminum Torque Plate
Part # EVOX-TQPLATE-00
Fits: EVO X
Anytime you're boring a block distortion will occur to the cylinders unless you have a honing/torque plate installed as a brace....
Sale Price: $377.95
|
Product Details
|
Kozmic Motorsports Evo X Aluminum Cam Sensor Heat Sheild
The exhaust cam position sensor plug on the 4b11 engine used in the Evo X is susceptible to heat damage, particularily with after market exhaust manifolds and headers. This heat sheild protects this sensor from direct radiant heat, preventing damage to the sensor.
Fits: Evo X
Sale Price: $59.95
|
Product Details
|
Mitsubishi OEM Valve Cover Gasket - EVO X
When replacing your EVO cams or changing your valve cover, it is always wise
to change the gasket at the same time.
This is a brand new OEM Mitsubishi EVO main valve
cover gasket.
Fits: Mitsubishi Lancer Evolution X
...
Sale Price: $78.95
|
Product Details
|
Rexpeed Black Engine Cover - EVO X
Great alternative to the plastic factory covers!
Made from high quality light weight 304 stainless steel with black metallic paint finish.
TECH TIP: Hardware is included with each kit for an easy installation. ...
Sale Price: $108.95
|
Product Details
|
Rexpeed Carbon Fiber Engine Cover - EVO X
Drop jaws when you pop the hood on your EVO with this slick carbon fiber gem!
The Rexpeed carbon fiber engine cover is made from high grade twill weave matte finish carbon fiber.
TECH TIP: Each kit comes with al...
Sale Price: $134.95
|
Product Details
|
STM Evo X Engine Oil Catch Can - Metal Valve Cover
The STM Engine Oil Catch Can for the Evo X metal valve cover includes everything you will need for a direct install. Our kit places the can neatly out of the way on the lower radiator support, also allowing easy drain access from under the car. The aluminum body is fully fabricated in-house and c...
Sale Price: $449.95
|
Product Details
|
STM Evo X Engine Oil Catch Can - Plastic Valve Cover
The STM Engine Oil Catch Can for the Evo X plastic valve cover includes everything you will need for a direct install. Our kit places the can neatly out of the way on the lower radiator support, also allowing easy drain access from under the car. The aluminum body is fully fabricated in-house and...
Sale Price: $449.95
|
|
|
|
EVO X Parts Guarantee
Super Fast Shipping | Smart Service | Secure Shopping | Satisfaction Guaranteed | Rush Returns
Mitsubishi Lancer Evolution X Parts
|