Home :: EVO X Clutch / Transmission :: Evo X Shifters & Bushings

Evo X Shifters & Bushings

3P Performance now offers a full cnc cut shift knob. Just like many of our other products our shift knobs are also anodized and laser engraved with our logo. Our shift knob also offers a unique design with interchangeable caps. This will allow you to change not the style of your cap but also c...
$45.95
Bang through gears with authority!

AMS Shifter Base Bushings will greatly improve shift quality and accuracy and are easy to install. Replaces the stock sloppy rubber base bushings.

Fits: Mitsubishi Lancer Evolutio...
$61.95
The AMS EVO X Polyurethane Cam Side Motor Mount will decrease engine and
transmission movement and result in more precise shifts and improved
throttle response.
$68.95
The AMS EVO X Polyurethane Front Motor Mount will decrease transmission movement and result in more precise shifts and improved throttle response. This piece has a Durometer rating of 70A which will transmit less vibration through the cabin than other popular brands which use a harder polyuretha...
$141.95
The AMS EVO X Polyurethane Transmission Side Motor Mount will decrease
engine and transmission movement and result in more precise shifts and
improved throttle response.
$67.95
The AMS EVO X Polyurethane Transmission Side Motor Mount will decrease
transmission movement and result in more precise shifts and improved
throttle response.
$219.95
Overheating is a common occurrence when driven hard.

The AMS Trans. cooler helps to prevent that by using a high quality larger capacity heat exchanger with a fan that pulls air through the core the entire time the car is running.

This helps to keep transmission te...
$617.95
This will make a dramatic difference in the way your EVO X shifts.

- CNC precision machined for perfect fitment
- High quality Aluminum
- Includes everythi...
$67.95
Flywheel bolts play an important role in the performance and safety of the EVO X. That’s why the fastener experts at ARP have developed special bolts that are far superior to OEM factory hardware.

TECH TIP: This is a full bolt kit. Enough to completely replace your stock EVO X flyw...
$65.95
Beatrush Shifter Base Bushings EVO X
$53.20
King Mitsubishi 4B11T (Size .025) Performance Rod Bearing Set - EVO X

PART# CR4586XP.025
$68.00
King Performance CR4586XPSTDX Rod Bearing Set - EVO X

PART# CR4586XPSTDX
$68.00
King Performance Rod Bearing Set - EVO X

Successful race engine builders are constantly pushing the limits of load capacity to new levels. Race bearings today inevitably need to match these demands with more competitive bearings. At King Racing we met the challenge with the XP high p...
$68.00
Bang through gears in style with this Mitsubishi shift knob!
$201.95
Bang through gears in style with this Mitsubishi shift knob!
$287.95
Many of the EVO X clutch kits do NOT include a throw out bearing.

This is a genuine Mitsubishi OEM EVO throw out bearing. Same throwout bearing that came stock on your Evolution X.

Fits:

$90.95
Evo X transmission fluid cocktail for the 5-speed Evo X that will have you banging through gears with ease!

Works great for street & track Evo X's. The red line cocktail is versatile enough to work in all climates.

Red line Evo X Tranny Cocktail Kit Includes:

...
$48.95
Tomioka Racing final drive gear set raises the overall gearing of EVO. Gear ratio is 5.0:1


***Special Order Only - Takes 4 weeks to receive***
$829.95
Tomioka Racing carbon fiber hood damper adds the much needed space when you work on the engine without the factory hood stand getting in the way. Tomioka Racing carbon fiber hood damper opens the hood to almost 90 degrees. The pressurized carbon fiber gas canister ensures smooth hood opening and ...
$149.95
Take your EVO X to the next level with Tomioka Racing's upgraded final drives. With 4.18 ratio, TR final drive gear with significantly reduce the RPM at cruising speed on the EVO X. TR trans components are designed to withstand the extreme on and off throttle shock loads produced during r...
$927.95
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with billet aluminum pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turn...
$49.99
Torque Solution billet shift knobs are machined from 6061 Billet material and hard anodized to resist scratching and wear. Each knob weighs 188g / 6.6oz to give you that more positive & smooth feel when shifting. Suitable for all forms of racing and gua...
$39.99
Torque Solution Gate Selector Pivot Bushing eliminates much of the shifter play felt on the Evo X models. Giving you a more precise feel in between gear changes. Get rid of that sloppy and less than direct feeling the Evo X has with this Delrin 2pc replacement kit.

-Reduced Shifter ...
$16.99
Torque Solution shifter base bushing kit replaces the OEM rubber bushings on the bottom of the shifter providing a more stable shifter platform and mounting points.
 
• Cnc machined 6061-T6 billet aluminum
• Installs in under 30 minutes
• Life Time ...
$36.95
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions, Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plastic...
$28.99
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions, Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plast...
$28.99
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions, Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plastics used in cur...
$38.95
Torque Solution short throw shifter is a direct replacement for your long throw stock unit.Our shifters are made from 4130 Chromoly steel and are Cnc machined to precision tolerances .After this they are set out to be chrome plated to last a lifetime.This is the best mod...
$114.99
Torque Solution short throw shifter is a direct replacement for your long throw stock unit.Our shifters are made from 4130 Chromoly steel and are Cnc machined to precision tolerances .After this they are set out to be chrome plated to last a lifetime.This is the best mod for your ride.
$114.00
Torque Solution short throw shifter is a direct replacement for y...
$114.99
Torque Solution short throw shifter is a direct replacement for your long throw stock unit. Our shifters are made from 4130 Chromoly steel and are Cnc machined to precision tolerances. Lastly they are black nickel plated to last a lifetime.

Features:
- 32% throw reduction
$185.99
Torque Solution short throw shifter is a direct replacement for your long throw stock unit. Our shifters are made from 4130 Chromoly steel and are Cnc machined to precision tolerances. Lastly they are black nickel plated to last a lifetime.
Features:
- 32% throw reduction
- 1.25...
$185.99
The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of fle...
$106.95
These 6061 Solid Billet bushings are much harder compared to the OEM units. By replacing them with these Solid Billet Inserts you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving...
$64.99
The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instea...
$94.99
The WORKS Hybrid (polyurethane/steel) Shifter Cable Bushings provide increased ease and precision during shifting without the increased wear on internal transmission components. With the run-of-the-mill bushings, you either have urethane pieces that can’t be accurately machined and in const...
$54.95

The WORKS polyurethane Shifter Console Bushings significantly increase the stiffness between the plastic shifter cage and the steel chassis for a more direct shifting feel. NOTE: These are not solid metal bushings which provide no "give" and can fatigue the plastic cage as it takes all o...

$47.95
The WORKS SS Brake Line Kit is not only the absolute best on the market, but is also designed to meet the Department of Transportation Motor Vehicle Standard MVSS-1006. Our performance lines increase safety and brake responsiveness due to no appreciable volumetric expansion in the brake lin...
$149.00
The WORKS Throw short shifter provides reduced travel when switching between gears. It incorporates a revised design to the OEM shape and leverage angles so your hand is located in a more natural position for the left hand drive Evolution.

Includes hardware, installation ...
$177.00