Home- EVO X Exhaust
- EVO X Intake
- EVO X Intercooler
- EVO X Turbo
- EVO X Engine Parts
- EVO X Fuel
- EVO X Blow off Valve
- EVO X Body Kits / Exterior
- EVO X Boost Controller
- EVO X Suspension
- EVO X Brakes
- EVO X Clutch / Transmission
- EVO X Interior
- EVO X Gauge Pod / Gauges
- EVO X Rims
- EVO X Maintenance
- EVO X Turbo Timer
- Clearance Sale >>
Today's Bestsellers
Evo X Engine Accessories
AGP Valve Cover Breather- EVO X
Part # AGP-EVOX-BREATHER
Instead of venting your oil vapors back into the intake system, reroute into one of our professionally constructed and fully tig welded breather systems. Using the same filtering media as our popular Oil Accumu...
Part # AGP-EVOX-BREATHER
Instead of venting your oil vapors back into the intake system, reroute into one of our professionally constructed and fully tig welded breather systems. Using the same filtering media as our popular Oil Accumu...
$172.95
AMS introduces the EVO X Small battery tray.
This very easy to install piece will allow you to remove you heavy stock battery and mount a lightweight race battery on its side to not only lower the overall weight of the car but also lower the center of gravity. This easy to install pi...
This very easy to install piece will allow you to remove you heavy stock battery and mount a lightweight race battery on its side to not only lower the overall weight of the car but also lower the center of gravity. This easy to install pi...
$59.95
All Aero Dynamic kits are made out of a high quality plastic-fiber glass or poly-urethane and comes with wire mesh grill if applicable. The Bay speed plastic-fiber glass or poly-urethane structure provides maximum stability and flexibility to the aero kit allowing for a great custom fitment.
$819.95
The Beatrush Oil-Air Separator Catch Tank for Evolution X removes the
oil from the engine ventilation system so the oil does not get sent
through the intake system; while reducing pressure inside the crankcase
through discharged gases released through the oil cap. Overall, this
prov...
$384.75
Brian Crower Block Sleeves are sourced from the leader in sleeving; Darton.. All sleeves are specifically chosen for maximum performance in your motor.
Fits: Lancer EVO X
Part# BC8010
Fits: Lancer EVO X
Part# BC8010
$475.95
The Stainless Series is a great affordable alternative for those that do not wish to have a colored fastener. The Stainless Series is constructed of Grade 8 304 Stainless Steel and is a great addition to any engine bay. The Stainless Series features our Signature Head design for a truly custom lo...
$55.95
Take pride in your engine bay or engine? It’s time to take it to the next level with a Titanium Series Dress Up Kit for your engine bay and engine! These kits are a complete replacement for most visible bolts and nuts on your specific vehicle’s engine bay, ready to bolt in as soon as they arrive....
$266.95
Take pride in your engine bay or engine? It’s time to take it to the next level with a Titanium Series Dress Up Kit for your engine bay and engine! These kits are a complete replacement for most visible bolts and nuts on your specific vehicle’s engine bay, ready to bolt in as soon as they arrive....
$120.95
The Evo X has a traditional style of breather system, that being a pipe joining the airfilter to the rear of the cam cover and a pipe joining the cam cover to the inlet manifold via a PCV mounted in the cover itself. At idle and cruise, the PCV opens and blow by gases are drawn from the cam cover...
$486.00
When the turbo is making boost (anything above atmospheric pressure, so even very small amounts of boost) the PCV closes to save pressurising the cam cover, but the volume of blow by gases increases as the engine is working harder. The oil mist is now drawn out and into the inlet of the turbo. Af...
$486.00
An Alloy washer reservoir filler for the Mitsubishi EVO 10.
It takes only minutes to install, but it will look fabulous for a very long time.
It takes only minutes to install, but it will look fabulous for a very long time.
$126.00
GReddy Carbon Hood Damper Kits are carefully designed for each specific
OEM hood application. The high-end Carbon Damper and the locking ball
joint / cup mounts allow for smooth opening and closing operation.
Installation is also made very easy with English instructions and
labeled mounts...
$321.95
GSC Power-Division Viton® Valve Stem Seals use genuine DuPont Viton® fluoroelastomer material. Viton® was specifically developed for the extreme conditions seen in today’s high horsepower, sport compact engines. Held to a higher standard, GSC Power-Division Viton® valve seals provide improv...
$63.95
JM Fab EVO X 4B11 Aluminum Torque Plate
Part # EVOX-TQPLATE-00
Fits: EVO X
Anytime you're boring a block distortion will occur to the cylinders unless you have a honing/torque plate installed as a brace....
Part # EVOX-TQPLATE-00
Fits: EVO X
Anytime you're boring a block distortion will occur to the cylinders unless you have a honing/torque plate installed as a brace....
$377.95
The exhaust cam position sensor plug on the 4b11 engine used in the Evo X is susceptible to heat damage, particularily with after market exhaust manifolds and headers. This heat sheild protects this sensor from direct radiant heat, preventing damage to the sensor.
Fits: Evo X
Fits: Evo X
$59.95
Brand new OEM EVO oil filter for your Lancer Evolution X.
This is a genuine OEM Mitsubishi oil filter, same one that comes on your EVO X ...
$9.95
When replacing your EVO cams or changing your valve cover, it is always wise
to change the gasket at the same time.
This is a brand new OEM Mitsubishi EVO main valve cover gasket.
Fits: Mitsubishi Lancer Evolution X
...
$78.95
Brand new OEM water pump for the EVO X. This is a genuine
brand new OEM Mitsubishi product, no "local parts store rebuild."
Fits: Mitsubishi Lancer Evolution X 2008+
This is an OEM Mitsubishi oil drain plug with gasket.
Buy this before
changing your oil, to save yourself a headache later.
...
$16.95
This is a genuine Mitsubishi OEM part!
Fits: EVO X
Part # 6370A770
Fits: EVO X
Part # 6370A770
$11.95
Great alternative to the plastic factory covers!
Made from high quality light weight 304 stainless steel with black metallic paint finish.
TECH TIP: Hardware is included with each kit for an easy installation. ...
Made from high quality light weight 304 stainless steel with black metallic paint finish.
TECH TIP: Hardware is included with each kit for an easy installation. ...
$108.95
Drop jaws when you pop the hood on your EVO with this slick carbon fiber gem!
The Rexpeed carbon fiber engine cover is made from high grade twill weave matte finish carbon fiber.
TECH TIP: Each kit comes with al...
The Rexpeed carbon fiber engine cover is made from high grade twill weave matte finish carbon fiber.
TECH TIP: Each kit comes with al...
$134.95
Instantly give your EVO X engine that WOW look with these slick fuse box covers.
$109.95
OEM-style carbon fiber engine cover for 2008-2010 Mitsubishi
Part# EC0809MITEVOX
Part# EC0809MITEVOX
$429.95
The STM Engine Oil Catch Can for the Evo X metal valve cover includes everything you will need for a direct install. Our kit places the can neatly out of the way on the lower radiator support, also allowing easy drain access from under the car. The aluminum body is fully fabricated in-house and c...
$449.95
The STM Engine Oil Catch Can for the Evo X plastic valve cover includes everything you will need for a direct install. Our kit places the can neatly out of the way on the lower radiator support, also allowing easy drain access from under the car. The aluminum body is fully fabricated in-house and...
$449.95
INFORMATION
CUSTOMER SERVICE
MY ACCOUNT
CONTACT US
-
ADDRESS:
Argos Open Technologies, LLC
2363 James St 644, Syracuse
13206-2840 , Michigan
United States -
TELEPHONE:
7735375249 -
EMAIL
Contact Us
Powered by Lumino
Copyright © 2002-2024 Argos Open Technologies, LLC
Copyright © 2002-2024 Argos Open Technologies, LLC