With the Mitsubishi EVO evolving here in the USA since 2003, a lot of parts have come out to make the car perform and handle to its full potential.
$209.95
The AMS EVO X "Widemouth" downpipe is the most power producing downpipe on the market for the EVO 10.
Using a CAD designed cast o2 housing AMS was able to obtain every angle for perfect fitment and flow.
The AMS downpipe is
completely made of 304 stainles...
$586.95
- Full Stainless Steel Construction
- 70mm diameter improves exhaust gas flow
- Includes all hardware and heat wrap for an easy install
- Direct bolt on!
Fits: Mitsubishi Lancer Evolution X 2008+ (CZ4A eng...
$408.95
Downpipe Features:
- One piece design replaces factory downpipe and catpipe
- High-flow 200 cell metal substrate catalytic converter
- Full 304 SS construction
- 3" mandrel bent tubing
...
$478.95
The divorced and transformable 3" stainless O2 housing and downpipe
assembly for 2008 and up Mitsubishi Evolution X (10) is a much higher
flowing replacement for stock restrictive cast iron exhaust elbow and
small diameter downpipe just before the cat.
This unit bolts ri...
$369.95
Already have a buschur racing catback exhaust? Well...The Buschur Racing
Evo X downpipe is the next piece in order to give your EVO X the best
performance.
$250.00
The COBB Tuning Mitsubishi EVO X Downpipe features a widened diameter of 3" for increased flow of exhaust gases from the turbo charger to allow for improved horsepower and torque.
$255.95
Introducing the cp-e™ Lancer Evolution X Cast O2 housing downpipe.
The factory O2 housing bolted to the turbo on the Mitsubishi Evolution X is very restrictive. And it limits the amount of exhaust that can flow through the area. We wanted to minimize restrictions and open up the fl...
$464.90
The EvoX is an incredibly potent machine, but it is unfortunate that
this new redesign did not get a big bump in power output.
$230.14
CP-E Mitsubishi EVO X QKspl™ Cast Bellmouth Downpipe
SKU: MTDP00002T
WEIGHT: 23 lbs
DIMENSIONS: 22 x 22 x 8 in
The factory O2 housing bolted to the turbo on the Mitsubishi Evolution X is very restrictive.&...
$520.90
CP-E Mitsubishi Evo X QKspl™ SS Downpipe
SKU: MTDP00001T
WEIGHT: 8 lbs
DIMENSIONS: 22 x 15 x 8 in
The EvoX is an incredibly potent machine, but it is unfortunate that this new redesign di...
$245.14
The ETS Evolution X Dump O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a vent to atmosphere wastegate dump for an intimating sound at wide open throttle. This downpipe has been engineered to be one of the highest flowing d...
$589.95
SKU: ETS_EVOX_DP_Recirc
Weight: 16.00 lbs
The ETS Evolution X Recirculated O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a recirculated wastegate dump for stock like sound under wide open throttle. Th...
$589.00
Improve turbo spool and increase throttle response instantly with this EVO
downpipe!
TECH TIP: Includes everything for an easy installation such as gaskets, hardware, etc.
Fits: Mitsubi...
$192.95
Improve exhaust gas flow and increase horsepower by replacing the restrictive stock down pipe.
65mm Diameter piping for maximum flow. Constructed of SUS304.
TECH TIP: Direct bolt on part.
$215.95
Key item in exhaust back pressure control, the GT Extension kit for the Mitsubishi Lancer Evolution X. With the R & D information gained from the HKS EVO X, CZ200S, maximizing the performance from the stock turbine was the primary focus of the new GT Extension kit.
$688.95
- 3" Stainless Steel Polished Piping
- Tuned for all-out performance for Racing applications only
- NOT C.A.R.B. exempt / Off Road Only
- CAD-rendered design eases installation
- CNC Machined Flanges with Mandrel bent tubing
- Increase air flow & performance wi...
$154.95
Mitsubishi Evolution 10 2008-2012 Stainless Steel Downpipe
Part# TP-195
$119.95
Features a
widened width of 3" for improved flow of exhaust gases from the
turbocharger.
The down pipe is constructed of T304 stainless steel,
mandrel bent tubing, which it capable of fitting to the OEM exhaust or
the Megan Racing EV...
$139.95
The MXP Mitsubishi Evolution X Downpipe is designed to increase horsepower by eliminating the Catalytic Converter and featuring a larger diameter pipe for better turbo airflow. Only for racing vehicles which may never be used upon a highway in the State of California or elsewhere vehicles must be...
$136.95
The MXP Mitsubishi Evolution X Downpipe is designed to increase horsepower by improving airflow with increased piping diameter over stock, and by eliminating the catalytic converter. This item has an extra bung for a wideband O2 sensor, which improves engine tuning. This product is made from (SUS...
$529.95
Full 3" stainless steel with thick flanges. This downpipe will help spool your turbo faster increasing boost and horsepower. A must have to maximize exhaust flow that is needed on a turbo charged car.
$239.95
Easily improve throttle response and horsepower with the Tanabe high flow downpipe.
$408.95
Tomioka Racing EVO X Downpipe allows high flow compares to the stock unit which has smaller piping and restrictive elbow.
$359.95
TR all stainless steel and TIG welded 3" EVO X long widemouth downpipe for with braided flexible section and O2 bung fitted for mapping purposes.
This downpipe allows high flow compares to the stock unit which has smaller piping and restrictive elbow. It is a complete bolt-on unit to...
$365.95
Make more power and let your turbo breathe!
- 304 Stainless steel piping
- 304 Stainless steel casted elbows
- TIG welded to perfection
- 3.0 lbs (starting) compared to 4.5 lbs OEM
Fits:
$149.95
This downpipe is for EVO 10 owners who want to achieve the most possible
horsepower possible! EvoXparts.com rates this the best downpipe on the market currently for the Lancer Evolution X 2008 +
Price includes a downpipe and O2 housing (turbo outlet)
- 304 Stainless steel piping...
$349.95
WORKS Exhale Exhaust: The WORKS modular Exhale series components allow EVO enthusiasts to quickly and easily mix and match the Exhale DP (Down Pipe), Test/Cat Pipe, IP (Intermediate Pipe), and AB (Axle Back) with the factory EVO exhaust components. All of our jigs are created using the factory OE...
$279.00