Estimated Horsepower Gain: 13.1 HP @ 4600 RPM
TECH TIP: Requires AEM 2102-A For Installation. The AEM 2102-A and 2102-B are designed as a kit and must be used together. Use of one without the other voids the AEM warranty.
Fits: Mitsubishi Lancer Evolution X 2010-2014
$406.99
AGP Aluminum Hard Pipes- EVO X
Part # AGP-EVOX-HARDPIPES
Introducing AGP's aluminum hard pipe kit for the Evolution X. This kit completely replaces the factory rubber hoses that can expand under boost. We have also relocated the blow off valve placement to the hot si...
$369.95
AGP Aluminum Hot Pipe- EVO X
Part # AGP-EVOX-HOTPIPE
The hot side tube is 2.5" mandrel bent polished aluminum with no weld joints in either pipe. The front pipe has a mounting tab to attach to the factory core support. The two pipes are joined by a high quality silic...
$139.95
AGP FMIC and Hardpipes Package- EVO X
Part # AGP-EVOX-FMIC_HARDPIPES
Get our package deal and replace all of your charge piping and intercooler, from the turbo to the throttle body.
This kit completely replaces the factory rubber hoses that can expand ...
$984.95
The AMS EVO X Lower Intercooler Pipe (LICP) is a direct replacement for your factory lower intercooler pipe and is made from lightweight 2.5” mandrel bent aluminum tubing.
$309.95
The AMS EVO X Upper Intercooler Pipe is designed to flow more air than its stock counterpart and increase horsepower, and that it d...
$339.45
The AQ Motorsports Evo X UICP (Upper Intercooler Pipe) is designed to replace the rubber factory pipe while offering improved response and power. Made from 2.5" 6061 Aluminum and completely mandrel bent (no welds), our UICP offers great looks along with great performance.
$209.95
The AQ Motorsports Evo X LICP (Lower Intercooler Pipe) is designed to replace
the rubber factory pipe while offering improved response and power. Made from
2.5" 6061 Aluminum and completely mandrel bent (no welds), our LICP offers great
looks along with great performance. Furthermore, ou...
$219.95
The AQ Motorsports Evo X Intercooler Piping Set is designed to replace the rubber
factory pipe while offering improved response and power. Made from 2.5" 6061
Aluminum and completely mandrel bent (no welds), our Piping offers great looks
along with great performance. Furthermore, our unit w...
$463.95
The stock rubber hose expands at boosting which decreases the efficiency of the boost pressure.
$587.95
It's a little shorter and much smoother than the stock one. We also were able to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood.
$245.00
It's a little shorter and much smoother than the stock one. We also were able to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood.
$275.00
The Buschur Racing 2008 Mitsubishi Evolution X upper intercooler pipe is made
from 2 1/2" mandrel bent stainless steel.
$245.00
It's a little shorter and much smoother than the stock one. We also were able to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood.
$245.00
This is CBRD 2.5" all aluminum construction CBRD Hot Charge pipe for the EVO X (from the turbocharger outlet pipe to the intercooler)-
This pipe is available in either one piece (as shown) or two piece- we recommend two piece for road racing due to the added stresses and heat...
$286.95
This is CBRD 2.75" Aluminum Cold Charge pipe (from the Intercooler to Tbody)
Since the Throttle body is apprx 2.75" CBRD decided to build a nice 2.75" one piece Cold Charge pipe for the evo X-
It allows for use of your stock bov hose return back to th...
$294.95
This is a perfect package for any EVO X owner looking for a turn-key Intercooler package for their 2008+ GSR or MR-
It includes CBRD high output (750hp+) Intercooler, which bolt's right in... our 2.5" Brushed aluminum one piece upper charge pipe (over the motor), and our 2....
$1227.95
As with all intercooler hard-pipe kits, the stock rubber hoses to the intercooler are replaced with solid pipes to eliminate distortion under boost. But the devil is in the details, and that is where similarities end. The COBB Tuning Intercooler Hard Pipe Kit consists of single piece pipes made f...
$595.00
Product Features
- Open up your Exhaust
- Deletes the Catalytic Converter
- Dyno Tuned & Tested
- Pipes & Flanges made from 100% Stainless Steel
- Works with factory turbo
Fits: EVO X
Part # MIP6011
$188.95
SKU: ETS_EVOX_LICP
Weight: 10.00 lbs
The ETS Mitsubishi Evo X Lower Piping Kit removes the factory rubber hoses which are prone to ballooning and popping off under higher boost pressure.
From the intercooler outlet the 2.5" mandrel bent pipin...
$308.95
SKU: ETS_EVOX_TI_UICP
The all new ETS Titanium Series upper intercooler pipe. This pipe is designed for maximum durability and performance by eliminating many of the unnecessary bends in the stock piping that snake around the stock engine bay.
The upper interco...
$489.95
SKU: ETS_EVOX_PipingKit
Weight: 25.00 lbs
The ETS EVO X intercooler piping kit is next in line and is a very cool modular package. The upper intercooler piping starts with a smooth mandrel bent 2.5" stock turbo outlet pipe which connects to the remainder of the hot sid...
$556.00
SKU: ETS_EVOX_PipingKit
Weight: 25.00 lbs
The ETS EVO X intercooler piping kit is next in line and is a very cool modular package. The upper intercooler piping starts with a smooth mandrel bent 2.5" stock turbo outlet pipe which connects to the remainder of the hot sid...
$556.00
The ETS Mitsubishi Evolution X Upper Pipe removes the restrictive factory pipe which necks down to 1.75" before the turbo outlet and replaces it with a full 2.5" upper intercooler pipe which helps with throttle response as well as reliability. The factory hoses are prone to ballooning and b...
$182.95
SKU: ETS_EVOX_UICP
The upper intercooler piping starts with a smooth mandrel bent 2.5" stock turbo outlet pipe which connects to the remainder of the hot side piping. The stock turbo outlet pipe is separate to allow it to be swapped out with the installation of our EVO X turb...
$259.00
An alloy Hard Pipe Kit the the EVO 10 that includes alloy pipe, silicone hose. hose connection flange and all mounting hardware. This has been designed to maximise flow and reduce the resistance of the original OEM fitment.
The connecting hose is available in red, blue and black. <...
$229.50
A silicone boost hose kit for the Mitsubishi EVO 10
They don't just look good either as they out perform the original hoses, but the best bit is the price !
$238.50
You may not want to have hoses that will last for years longer than the original hoses or want to know that when it gets hot enough for the originals to burst, these will carry one working, but I am sure you will want to have the best looking hoses available.
Available in red,black...
$153.00
The GREddy EVO X Intercooler Pipe kit is designed to replace the rubber factory pipe while offering improved response and power. Made from 60-70mm 6061 Aluminum.
$525.95
Increased boost will require increase cooling capabilities.
Core Type: R-Type
Width: 525mm
Height: 304mm
Thickness: 103mm
Includes 3pc HKS Aluminum intercooler hard pipe kit.
$2430.95
HKS Intercooler Pipe Upgrade kits increase efficiency & performance
over the factory intercooler pipe system.
The use of metal intercooler
piping offers increased durability, consistent higher boost pressure,
improved response & an attractive appearance.
...
$815.95
Direct fit for the Evo X
Lightweight, polished aluminum pipes
Your choice of black, red, or blue couplers
Mishimoto Limited Lifetime Warranty
$258.95
Direct fit for the Evo X
Lightweight, polished aluminum pipes
Your choice of black, red, or blue couplers
Mishimoto Limited Lifetime Warranty
$281.95
Add to the "cool-factor" of your vehicles engine compartment by dressing it up under the hood.
TECH TIP: Includes Upper intercooler pipe + hardware for installation.
$288.95
Carbon fiber covers mount on each side of your stock front mount intercooler end tanks.
Direct bolt on,
replaces stock unit! No other modifications needed. Easy installation
takes 60 minutes and can be done with common hand tools in the dr...
$179.95
Samco silicon hoses are extremely durable and hand made for best fitment,
flow, and strength.
The 3 ply hose comes in a 6 piece kit for all your turbo
hose parts.
The kit is available in blue, red, and black. Each hose has the
Samco logo on it.
$392.95
The SpeedCircuit Hotpipe (Upper Intercooler Pipe) is a single piece 2.5" mandrel bent 304 stainless steel pipe (instead of cheap aluminum or steel that some competitors use to save money). Rather than slimming down the diameter halfway through the pipe like the factory part, our part remains at 2...
$188.95
STM Upper Intercooler Pipe Kit
- Evo X
The STM Upper Intercooler Pipe Kit for the Evo X is tig welded, 2.5" aluminum piping for light-weight benefits and includes 6 stainless T-Bolt clamps and 3 high-quality black, STM silicone couplers.
Allows you to remove the su...
$269.95
The STM Upper Intercooler Pipe Kit for the Evo X is tig welded, 2.5" aluminum piping for light-weight benefits and includes 6 stainless T-Bolt clamps and 3 high-quality black, STM silicone couplers.
Allows you to remove the super-restrictive 1.75" factory pipe, while freeing up air...
$274.95
This kit includes the Lower IC Pipe Assembly, Upper IC Pipe Assembly,
Intake Pipe, Air Filter and Synchronic BOV/DV. Features full
recirculation. Connects to the stock intercooler.
TECH TIP: This system will not fit the EVO X MR. If you have an EVO X MR you
will nee...
$899.95
This kit includes the Lower IC Pipe Assembly, Upper IC Pipe Assembly,
Intake Pipe, Air Filter and Synchronic BOV/DV. Features full
recirculation. Connects to the stock intercooler.
Fits: 08+ EVOX MR
Part# 16708
$899.95
The Synapse UICP retains the OEM turbo discharge pipe and maintains
the OEM boost-only source fitting to connect to the wastegate for a
much more stable boost control source. Competing designs require
elimination of this crucial component requiring the use of vacuum for
wastegate an...
$269.95
The upper intercooler pipe upgrade kit is a good mod to do after you have installed a cat-back exhaust, downpipe, and intake on your EVO 10.
$280.95
The lower intercooler pipe upgrade kit is a good mod to do after you have
installed a cat-back exhaust, downpipe, and intake on your EVO 10.
- Replaces both lower pipes from intercooler to throttle body
- 2.5" Stainless Steel Piping
- Bead Rolled Pipe Ends
- ...
$194.95
The upper intercooler pipe upgrade kit is a good mod to do after you have installed a cat-back exhaust, downpipe, and intake on your EVO 10.
$124.95
WeaponR Upper Intercooler Pipe Neo Ti - EVO X
Part# 501-111-405
$399.95