The 3P Performance weld on maf flange is perfect for converting your car to a blow thru setup or building your own custom intake.

Fits: Lancer EVO X

To gain power from the 4B11 MIVEC, AEM designed a fully enclosed airbox to house a DRYFLOW performance filter & utilize the factory air duct to draw the coolest air possible. 

TECH TIP: Direct bolt on - Includes everything required for i...

Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will out flow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washa...

Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will out flow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washa...

Turbocharged vehicles require a couple of simple bolt on modifications to really open up their power and give that engine a great sound.

Improving upon turbo air flow is what the new Agency Power Suction Pipe Kit for the Mitsubishi EVO X is designed to do.

AGP Cold Air Intake V.2- EVO X

Part # AGP-EVOX-CAIV2

Introducing the best performing intake available for the Evolution X. Not only does it eliminate the restrictive factory airbox, but it's the only intake on the market that locates the filter in the fenderwell. Thi...

With this kit you can convert your standard AMS EVO X intake to the AMS cold-air version.

With this kit you can convert your standard AMS EVO X intake to the AMS cold-air version.
The AMS EVO X Performance Cold Air Intake offers the best performance gains available. By relocating the air filter to behind the driver side front bumper, cool air from outside the engine compartment ...

With this kit you can convert your standard AMS EVO X intake to our cold-air version.

The AMS EVO X Performance Cold Air Intake offers the best performance gains available. By relocating the air filter to behind the driver side front bumper, cool air from outside the engine compartme...

AMS Mitsubishi Lancer Evolution X Performance Intake Black - EVO X

The AMS EVO X Performance Intake removes clutter and simplifies your engine bay while adding horsepower!

Bungs: YES
SKU: AMS.04.08.0002-2

The AMS EVO X Performance Cold Air Intake offers the best performance gains available.

AMS Performance Cold Air Intake - EVO X

The AMS EVO X Performance Cold Air Intake offers the best performance gains available.

PART# A0064A-3A

AMS Performance Intake Black - EVO X

This product is being offered “as is” which means no warranty, no returns, and no exchanges. The recirculation tube has been stitch welded. The AMS EVO X Performance Intake removes clutter and simplifies your engine bay while adding horsepower!

Sale Price: $389.95

Quantity

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Buy Now

Easily improve throttle by installing this high flow efficient intake system.

High flow compressor 3" inlet elbow for the EVO X turbo. Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate, it fits the Garrett GT3071R, GT3076R, or ATP GT35R. 3 bolt flanged. All aluminum, TIG welded construction and wrinkle black powdercoated.

High flow compressor 3" inlet pipe set for EVO X turbo. Includes 3" inlet elbow, 3" couplers, and upper pipe to mate to airbox. All aluminum, TIG welded construction and wrinkle black powdercoated.
Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate, ...

High flow compressor outlet pipe for Evo X turbo. 2 bolt flanged, progressive tapered and larger diameter. Lightweight aluminum. Contoured machined outlet flange for smooth flow and o-ring flange face eliminates leaks and the 2 bolt gasket for proper seal. Immediately tapers from stock 1.75" diam...

A complete Intake kit. Including the Carbon Air Duct, and the filter element. This system will allow you to utilize the factory Cold air setup that forces cool air from the front of the car into the intake system.

Fits: 08+ EVO X

Part# 27007

The BLITZ LM Intake System was design to reduce intake restriction and provide maximum filtration.

By utilizing a 4 layer cotton filter, blitz has created an air filter that reduces air resistance, increases filtering efficiency and is very durable.

Improve horsepower and gas mileage instantly!

This is the Buschur Racing Air Filter Kit for the 2008 Mitsubishi Lancer Evolution X.

Made of 304 mandrel bent S.S. this is a direct replacement of your factory air inlet. It will include couplings, clamps and a new recirculation hose for your BOV.

This is the newest offering for the Evo X intake system from Buschur Racing.

The BR Evo X mass air pipe kit is a COMPLETE air intake system for you Evolution X.

The BR Evo X mass air pipe kit is a COMPLETE air intake system for you Evolution X.

The kit will include everything pictured which is our BR Evo X Mass Air Pipe, Air filter kit & mounting bracket.

The kit will include everything pictured which is our BR Evo X Mass Air Pipe, Air filter kit & mounting bracket.

Designed to work with the CBRD 2.75" Cold Charge pipe  - CBRD cannot promise fitment with other cold charge pipes-

It relocated the intake in the driver's front fender- allowing a cold air feed that helps to lower IAT- and increase HP- it also avoids the idle devia...

COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using proprietary woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your e...

The COBB Tuning SF Intake utilizes our custom design to maintain optimal flow and net the ideal performance while remaining unedited from the factory velocity stack. The custom conical cloth filter feeds filtered air directly to the engine, while maintaining optimal intake velocity and minimizing...

The COBB Tuning 3-inch Turbo Inlet Hose is designed for use with 3" inlet turbos, such as the MHI TF06-18K.

The bulge design of the COBB Inlet Hose increases the cross-section to 3.5-inch to maximize air flow delivered directly to your 3" turbocharger, providing much more efficien...

COBB Tuning Mitsubishi SF Airbox Kit Evo X 2008-2015

Part # 752150

Fits: Mitsubishi EVO X 2008-2015

The COBB Tuning Evo X SF Airbox is designed to be used along with the Evo X SF Intake System. This item is al...

When installed on a stock EVO X, the Cobb Tuning SF Intake system adds an additional 21 HP and 24 lb-ft of torque to the wheels. Expect even larger gains when running higher than stock boost levels.

The true taper design of the COBB Inlet Hose increases the air flow volume that is delivered directly to your turbocharger, providing much more efficient power and response. 

The COBB Tuning high flow Turbo Inlet Hose utilizes a custom steel re...

Cosworth's High Flow Intake Systems feature increased diameter, large smooth radius bent aluminum inlet tubes for superior air flow management coupled with a high flow air filter for maximum air flow and performance.

Each kit includes an integrated heat shield designed to...

 The ETS Mitsubishi Evolution X 3.5" Maf Housing with Velocity Stack. Made to replace your stock housing to allow more air flow for your high horsepower Evo X.  Made with a 5" wide velocity stack to allow the use of a larger filter for maximum air flow. Optional Filter & Coupler ava...

SKU: ETS_EVOX_INT

The ETS MAF Intake Includes a huge 5" inlet K+N air filter which feeds the intake pipe via the ETS EVO X MAF adapter which is milled on the ETS lathe for the perfect transition to the inlet diameter of the MAF sensor tube.  With a built in dowel pin and preci...

The GReddy EVO X suction intake pipe increases the air flow volume that is delivered directly to your turbocharger, providing much more efficient power and response.

If you are running a stock air filter do your car a favor and buy this hybrid drop in panel filter.

The hybrid is totally redesigned from the old school HKS drop in panel filter.

The HKS hybrid panel air filter has a redesigned filter that houses 2 different types o...

Features a high flow aluminum suction pipe that has been tested for optimal air flow.

Filter cage allows for 30% more intake surface area, Aluminum back plate for added strength, Sealing ring reduces contaminants from entering engine, Dual Density wet filter element.
...

Injen AMSOIL Ea Nanofiber Dry Air Filter- 3.5"

Part # X-1021-BB

Size:  6 in Base / 6.875in Tall / 5.5in Top

In 1999 Injen designed the first urethane filter with a built in velocity stack for added performance. The Injen Technology Research and De...

Injen High Performance Air Filter - 3.5" Black Oiled Filter

Part # X-1021-BR

Size: 6 in Base / 6.875in Tall / 5.5in Top

In 1999 Injen designed the first urethane filter with a built in velocity stack for added performance. The Injen Technology Research...

Injen Short Ram Intake- 2008, 2010-2015 Mitsubishi EVO X

Part # SP1899

Black (SP1899BLK)
Polished (SP1899P)

Fits:
2008, 2010-2015 Mitsubishi Lancer Evolution GSR.
2008, 2010-2015 Mitsubishi Lancer Evolution MR.
2010-2011 Mit...

Part # EVOX-MAFFLNG-00

Fits: EVO X

If you're looking to make your own intake pipe you'll need one of these. CNC machined from 6061 billet aluminum, the bottom side is contoured to fit snu...

K&N Universal Filter - Round Cone Filter: K&N's Universal Air Filters are designed and manufactured for a wide variety of applications. Regardless of the angle, offset diameter of the air ...

Why not bolt 21 Horsepower on to your EVO X in minutes?

The K&N typhoon Air Intake system includes turbo air intake pipe, high flow air filter, hose clamps, heat shield, and full upper intercooler pipe and all necessary hardware to install. 2 great mods 1 low price!
...

Instantly bolt 21+ Horsepower on to your EVO X! The K&N typhoon Air Intake system includes turbo air intake pipe, high flow air filter, hose clamps, heat shield and all necessary hardware to install. It also includes a full upper upper intercooler pipe. 2 mods for 1 LOW price! After ins...

Get rid of the stock EVO 10 intake and replace it with a fresh new upgraded carbon fiber intake.

Direct bolt on, replaces stock unit! No other modifications needed. Easy installation takes 40 minutes and can be done with common hand to...

The Takeda Retain Intake produced 12hp and 20 ft lbs of torque.

Takeda intakes are constructed out of lightweight clear-coat anodized tubing for maximum air flow and a great style.

Torque Solution continues to push the limits of high performance aftermarket products with our 4ply Silicone Turbo Inlet Hose. This hose is designed to work with Forced Performance 3" turbos. Our silicone hose smooths the air entering the turbo which allows you to make more power. The inlet is 3"...

The TurboXS High Performance Intake System for the Evolution X is the perfect starting block to build your Street & Race Monster around.

Designed to improve air flow to the turbocharger and increase horsepower and performance.

- High Flow Cone Filter
- MAF Housing
- Bolt-on

Ultimate Racing Evo X Short Ram Intake

Build
- High Flow Cone Filter
- MAF Housing
- Bolt-on


Fits: Evo X

Weapon R Cold Air Secret Weapon Intake - EVO X

The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other. This technology increases air volume and sp...

The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other.

This technology increases air volume and speed to the engine, which naturally ...

Better air flow means more power. Cleaner air means increased engine longevity. Now you can have the best of both worlds with the WORKS High-flow Drop-in Air Filter.

This direct drop-in replacement for the factory filter retains stock drivability and can flow more than tw...