Home :: Products Map

Products Map

* A B C D E F G H I J K M N O P Q R S T U V W #


ACL main bearings have a special coating process that will help prevent premature engine failure.

The ACL main bearings have a higher degree of crush, and no flash plating to ensure efficient heat transfer away from the bearings.

TECH TIP: Includes ACL Thrust waster set....
$91.95
ACL rod bearings have a special coating process that will help prevent premature engine failure.

The ACL rod bearings have a higher degree of crush, and no flash plating to ensure efficient heat transfer away from the bearings.

Fits: 4B11T EVO X

Part# 4B1236...
$58.95
ME3-HDR4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressur...
$1004.00
ME3-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressur...
$1042.00
ME3-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressur...
$1036.00
ME3-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressur...
$1100.00
ME3-HDSD kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressur...
$1059.00
Super lightweight! Weighing in at a measly 9.5lbs.

- Preferred for Road Racing or minimum inertia
- Quick throttle response and acceleration
- Lightest with lowest inertia
- Reduced drivability
$559.00
The EVO X ACT Race Clutch Kit (4 puck sprung hub) will hold up to 655LBS Torque. This is a full clutch kit, Includes clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

$1042.00

The EVO X ACT Race Clutch Kit (4 puck) will hold up to 655LBS Torque. This is a full clutch kit, Includes clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

$1004.00
The EVO X ACT Race Clutch Kit (6 puck sprung hub) will hold up to 537LBS Torque. This is a full clutch kit, Includes clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

$1004.00

The EVO X ACT Race Clutch Kit (6 puck) will hold up to 537LBS Torque. This is a full clutch kit, Includes clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

$1036.00

ACT Release Bearing

Part # RB602
$195.00
The ACT Street EVO X kit will hold up to 420LBS Torque. This is a full clutch kit, Includes street clutch disc, heavy duty pressure plate, alignment tool, and throw out bearing.

The pedal feel is similar to stock. It is a little bit stiffer then stock, but nothing that is going to b...

$1063.00
Only 12lbs!

- Preferred for Street and Drag Racing
- Improved throttle response and acceleration
- Considerably lighter than stock
- Most durable flywheel available
- Good drivability
$535.00
AEM 320LPH 65mm Fuel Pump Kit w/o Mounting Hooks Ethanol Compatible - EVO X

AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the co...
$119.98
AEM’s wideband air/fuel gauge unites unsurpassed accuracy, speed and control with an easy to read, analog interface. The AEM wideband also offers a 0-5v analog output for use with data loggers and virtually any engine management system, such as the AEM EMS or FIC.
Part Number: 30-5130
$233.95
AEM boost control solenoid kits will not degrade rich fuel mixtures like most common boost control solenoids. This will significantly extend life and eliminate the chance of sticking from contamination.

They are pressure-tested to an amazing 100 psi and will not leak. AEM ...
$101.70
To gain power from the 4B11 MIVEC, AEM designed a fully enclosed airbox to house a DRYFLOW performance filter & utilize the factory air duct to draw the coolest air possible. 

TECH TIP: Direct bolt on - Includes everything required for i...

$479.95
30-4100. While cosmetically identical the new AEM 30-4110 wideband controller gauge utilizes a Bosch 4.9 LSU oxygen sensor for enhanced accuracy and require no free air calibration - ever!

AEM UEGO 30-4110 Features:

  - Interchangeable black and white faceplates...
$238.42
Estimated Horsepower Gain: 13.1 HP @ 4600 RPM

AEM EVO X Intercooler was designed to significantly reduce inlet air temperature and provide more volume than the stock EVO X intercooler.

AEM Intercoolers are designed using CFD and flow data and usually have an extra port i...
$1289.99
The AEM High Output Inductive Coil is a “dumb coil” designed to be used with an ignitor. This coil offers the high spark energy and voltage typical of a CDI ignition system, but delivers a long spark duration that can only be achieved using inductive coils. The coil itself is constructed ...
$59.20
 AEM is pleased to introduce its new Inline Wideband Air/Fuel Controller-the ultimate solution for speed, accuracy, and ease of installation.

WHAT IT DOES
The Inline Wideband UEGO gives all the benefits of the AEM Wideband Air/Fue...
$236.95
Estimated Horsepower Gain: 13.1 HP @ 4600 RPM

TECH TIP: Requires AEM 2102-A For Installation. The AEM 2102-A and 2102-B are designed as a kit and must be used together. Use of one without the other voids the AEM warranty.

Fits: Mitsubishi Lancer Evolution X 2010-2014
$406.99

AEM 30-4350 Tru boost goes great with the AEM UEGO wide band. This unit has a dual feature! You can read your boost and adjust it all from 1 unit!

  • Complete stand-alone boost controller gauge  

    $318.85
For forced induction vehicles up to 35 PSI of boost. The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.

Large adjustment knobs and numbering for easy programming
Covered status LED and...
$476.83
AEM is pleased to introduce its X-WiFi Module, which allows wireless monitoring of real time exhaust gas data from virtually any WiFi enabled device.

WHAT IT DOES
    The AEM X-WiFi is the complete exhaust gas moni...
$366.83
Aeromotive 325 Stealth In-Tank Fuel Pump - EVO X

PART# 11165
$190.95
Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will out flow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washa...
$80.95
Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will out flow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washa...
$80.95
aFe has released their Takeda Dual Cat-Back Exhaust System for the 2008-2013 Mitsubishi Lancer Evolution X.

In recent testing this system produced 17 horsepower and 20 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 3" mandrel bent, 304 stainless steel ...
$808.95
Agency Power wanted to take the suspension capabilities to the next level by developing this Rear Sway Bar kit for the 2008 and up Mitsubishi EVO X
$235.00
Agency Power 3pc Blow off Valve Blue Silicone Return Hose Kit- Evo X

Part Number: AP-CZ4A-155BL

Fits: Evo X 2008 to 2014
$125.95
Add more style to your engine bay with this 3 piece silicone radiator hose kit for the new Mitsubishi EVO X.
$150.00
Keeping the turbo spooled between shifts, holding boost pressure strong, and giving you adjustability is what the all new Agency Power Blow Off Valve offers you.
Knowing that the EVO has a very sensitive MAF which causes many BOV's not to work correctly, Agency Power turn to its design tea...
$225.95
Agency Power has developed a new gauge pod for the 2008 and up Mitsubishi EVO X.

Provides a easy mounting option for your necessary aftermarket gauges. Hand laid wet carbon fiber design. Can be installed using double sided tape or the provided screws. No gauges are provided...
$169.95
Agency Power has developed a new gauge pod for the 2008 and up Mitsubishi EVO X.

Provides a easy mounting option for your necessary aftermarket gauges. Hand laid wet carbon fiber design. Can be installed using double sided tape or the provided screws. No gauges are provided...
$169.95
Steel Braided lines improve component performance over the stock rubber hose. With rubber hose, the fluid under pressure flexes the hose, cause loss in firmness and reaction. With the steel braided lines, the response is firmer giving you more control.

Agency Power brakeline kits ar...
$70.00
Agency Power has released their new Mitsubishi EVO X fuel rail. This fuel rail is a direct replacement for the factory unit.
$209.95
Agency Power has just released a brand new lower motor mount for your Mitsubishi EVO X.
$100.95
As you step up the power level on your 2008+ Mitsubishi Evo X, having proper cooling efficiency is mandatory to maximize your vehicles performance.
$771.95
Agency Power has designed a Mitsubishi Evo X crank pulley for the 4B11 engine.
$140.00
With the Mitsubishi EVO evolving here in the USA since 2003, a lot of parts have come out to make the car perform and handle to its full potential.
$209.95
Agency Power has been known for their incredible suspension components to make you the fastest on the race track.
$419.95
Agency Power has been known for their incredible suspension components to make you the fastest on the race track. Without even wasting time, Agency Power has released their new fully adjustable lower control arms for the 2008 and up Mitsubishi EVO X. These control arms replace the factory units o...
$450.00
Steel Braided lines improve component performance over the stock rubber hose. With rubber hose, the fluid under pressure flexes the hose, cause loss in firmness and reaction. With the steel braided lines, the response is firmer giving you more control.

Agency Power brakeline kits ar...
$70.00
Agency Power Red Silicone 3pc BOV Return Hose Kit- Evo X

Part Number: AP-CZ4A-155R

Fits: Evo X 2008 to 2014
$126.95
Turbocharged vehicles require a couple of simple bolt on modifications to really open up their power and give that engine a great sound.
$300.00
Agency Power Silicone 3pc Silver Blow off Valve Return Hose Kit

Part Number: AP-CZ4A-155S

Fits: Evo X 2008 to 2014
$126.95
Dress up your engine bay with this all new silicone blow off valve return hose from Agency Power.
$126.95
Adding a high quality exhaust header is a great way to gain power for the EVO X. The Agency Power stainless steel exhaust header is constructed with quality in mind and the purpose of gaining power. Designed to be a direct bolt on part, the Agency Power header consists of larger more free flowing...
$600.00
Agency Power, EVO X, EVO X Exhaust, Exhaust, Ti Tip Dual Catback
$1000.00
Agency Power has always engineered products to provide a gain in performance, while offering a stylish alternative to enhance your vehicles appearance. The latest product from the Agency Power line is this new Stainless exhaust system. The exhaust system features piping that is 321 stainless stee...
$1550.00
Improving upon turbo air flow is what the new Agency Power Suction Pipe Kit for the Mitsubishi EVO X is designed to do.
$220.00
Agency Power Shorty Antenna - V2: Agency Power V2 Fin Universal Shorty Antenna

Style and individuality is why you own the car you do! Agency Power has released these 2 different styles of shorty antennas to fit your 2008 and up vehicle. These antennas fit vehicles such as the Subar...
$50.00
AGP Aluminum Hard Pipes- EVO X

Part # AGP-EVOX-HARDPIPES

Introducing AGP's aluminum hard pipe kit for the Evolution X. This kit completely replaces the factory rubber hoses that can expand under boost. We have also relocated the blow off valve placement to the hot si...
$369.95
AGP Aluminum Hot Pipe- EVO X

Part # AGP-EVOX-HOTPIPE

The hot side tube is 2.5" mandrel bent polished aluminum with no weld joints in either pipe. The front pipe has a mounting tab to attach to the factory core support. The two pipes are joined by a high quality silic...
$139.95
AGP Billet Wastegate Actuator- EVO X

Part # AGP-EVOX-WGA

Ditch your stock Evo X wastegate actuator for a high pressure adjustable AGP billet aluminum unit. This replaces the factory installed piece, and will allow you to hold higher boost pressures to redline.
...
$184.95
AGP Boost Leak Tester- EVO X

Part # AGP-BOOSTTESTER

Use this aluminum boost leak tester tube to check your system for leaks.  The tube is 3" and has the necessary bead formed on the end so it will not blow off during tests.  The other end has a 1/4" NPT bun...
$34.95
AGP Cold Air Intake V.2- EVO X

Part # AGP-EVOX-CAIV2

Introducing the best performing intake available for the Evolution X. Not only does it eliminate the restrictive factory airbox, but it's the only intake on the market that locates the filter in the fenderwell. Thi...
$296.95