Mitsubishi Evo X Fuel Injector Clinic Injector Set: 4x900cc Modified Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGT USC4 or add Plug &Play adaptors PADPUtoD4.
$420.95
Fidanza flywheels are made from 6061 T6 aluminum, they are designed to
be as light as possible, but at the same time remaining durable.
The friction surface is made of a very special 1050 high carbon alloy steel which allows the use of about any clutch material.
Aluminum f...
$337.95
Fidanza V1 Clutch Kit - EVO X
Fidanza V1 Series clutch kits feature a sprung hub full-face organic street disc designed to reduce vibration and are caged for additional support and safety. They include a balanced and tested pressure plate with increased clamp load strength over stock...
$776.95
Flex-a-lite 114 Trimline Series Fan - EVO X
Used as a primary fan, these economical fans free up wasted horsepower and increase gas mileage by replacing the stock fan (where applicable). Used as an auxiliary fan (pusher), this unit will provide additional cooling in an engine prone ...
$129.47
Flex-a-lite 410 Low Profile Puller Fan - EVO X
*Features:*
* Lowest Profile Industry Wide
* Rigid Brackets & Through Core Installation Kit Included
* Entire Assembly Only 2-5/8" deep
PART# 410
SUPERSEDED TO PART# 116551
$969.95
Performance engine damper for the 2008-2015 Mitsubishi Evo X with the 2.0L 4B11/T MIVEC engine.
This damper tested and delivered up to 70% overall greater crankshaft torsional vibration control above the OEM tuned elastomer style harmonic balancer on a near stock engine.
<...
$372.95
As seen on all of our Evo X FP Turbochargers, we now have available our 3" inlet pipe for the Evo X.
Part# FPEVOXIP
$175.00
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process
It is designed and built with the intention of in...
$180.00
An alloy Hard Pipe Kit the the EVO 10 that includes alloy pipe, silicone hose. hose connection flange and all mounting hardware. This has been designed to maximise flow and reduce the resistance of the original OEM fitment.
The connecting hose is available in red, blue and black. <...
$229.50
Tired of boost falling off in your EVO X?
The Forge Motorsports EVO X billet actuator will eliminate boost fading!
This actuator will hold a solid 35psi to 8500rpm on a 50trim turbo.
Comes equipped with a 15psi spring and will accept sto...
$208.95
The Evo X has a traditional style of breather system, that being a pipe joining the airfilter to the rear of the cam cover and a pipe joining the cam cover to the inlet manifold via a PCV mounted in the cover itself. At idle and cruise, the PCV opens and blow by gases are drawn from the cam cover...
$486.00
When the turbo is making boost (anything above atmospheric pressure, so even very small amounts of boost) the PCV closes to save pressurising the cam cover, but the volume of blow by gases increases as the engine is working harder. The oil mist is now drawn out and into the inlet of the turbo. Af...
$486.00
A silicone boost hose kit for the Mitsubishi EVO 10
They don't just look good either as they out perform the original hoses, but the best bit is the price !
$238.50
You may not want to have hoses that will last for years longer than the original hoses or want to know that when it gets hot enough for the originals to burst, these will carry one working, but I am sure you will want to have the best looking hoses available.
Available in red,black...
$153.00
The Forge RS valve has been specifically designed and engineered, to offer extreme flow rate capability, where other valves are just not up to it. Often when engines have been tuned by installing larger turbos or even software upgrades improved turbo response can be acheived by fitting the RS val...
$267.95
This intercooler is for the Mitsubishi EVO 10 is larger than the OEM intercooler and uses a highly efficient tube and fin core design.
Our core uses up all the space that Mitsubishi had failed to take advantage of.
The core measures a ma...
$900.00
An Alloy washer reservoir filler for the Mitsubishi EVO 10.
It takes only minutes to install, but it will look fabulous for a very long time.
$126.00
Completely built in-house by engineering staff in Richmond, VA. Fortune Auto insists on building bespoke suspension in order to offer the best quality control in the industry!
Benefits Include:
FA Synthethic Shock Oil
Digressive Piston Technology
24-Ste...
$1323.95
Fortune Auto is proud to release the all new Generation 5-510 Series Dampers. The advanced suspension technology found in their new dampers is derived from recent successes in World Challenge, One Lap, and Global Time Attack. All systems are built completely in-house by the engineering staff at F...
$2017.95
No more sumping the tanks on your HIGH HP cars!! We've designed a CNC Billet hanger that will mount 2 Intake pumps that's a direct drop into factory fuel tank. Our Dual Pump Hanger is CNC machined from top notch billet aluminum then anodized for a long lasting protective finish. It's capable of u...
$469.00
Full-Race is proud to release their latest iteration of their legendary ProStock turbo manifold, designed specifically for the EVO X! This high quality robotically-TIG welded stainless steel turbo manifold is a direct bolt-on replacement for the OEM cast turbo manifold. Designed to work with any ...
$1358.95
Full Race Mitsubishi Evo X EFR EWG Twin Scroll Turbo Kit Includes:
Full-Race EVO X T4 Twin Scroll EFR Turbo Manifold
Full-Race EVO X T4 Twin Scroll EFR 3" Downpipe
Full-Race EVO X T4 Twin Scroll EFR Kit Box
$2062.95
Mitsubishi Evo X 4B11T EFR (Internal WG) Twin Scroll Turbo Kit Includes:
Full-Race EVO X (Internal WG) Twin Scroll Manifold
Full-Race EVO X Twin Scroll 3" Downpipe
Full-Race EVO X Twin Scroll Kit Box
$2522.95