Home :: Products Map

Products Map

* A B C D E F G H I J K M N O P Q R S T U V W #


Made from real carbon fiber comes in 6 pieces.

Sold as a set.

- Comes with 3M adhesive on back side
- Easy to install, no cutting is needed
- 100% Brand New
- High Quality Beautiful Carbon Weaves
- Kit includes 6 CF pillar trims

For E...
$119.00
Each carbon fiber side spat comes with high gloss clear coat finish.
Gives your Evo a distinctive look and also protects your paint from rock chips.
Includes 3M adhesive and are predrilled for a easy install.
No modifications needed.

Sold in pairs.

$135.00
Each forged carbon side spat comes with high gloss clear coat finish.
Gives your Evo a distinctive look and also protects your paint from rock chips.

Includes 3M adhesive and are predrilled for an easy install.
No modifications needed.

Sold in pairs.
...
$150.00
CUSCO ZERO-3 series suspension coilover kits designed for sport and competition Enthusiasts of all levels can enjoy the ZERO 3 series, from a daily driven street vehicle (ZERO 3S) to a motivated track enthusiast (ZERO 3) to the die hard circuit animal (ZERO 3X)!

The ZERO 3 series hav...
$2976.30
CUSCO ZERO-3 series suspension coilover kits designed for sport and competition
Enthusiasts of all levels can enjoy the ZERO 3 series, from a daily driven street vehicle (ZERO 3S) to a motivated track enthusiast (ZERO 3) to the die hard circuit animal (ZERO 3X)!

The ZERO 3 seri...
$4807.00
Type RS- Low initial torque type using RS springs.

One way LSD. Specially suited for front wheel drive cars and 4WD car front axles. Activates under accleration, and acts as a true LSD when the throttle is off. A great chance for improved lap times. A Cusco original design.
$1311.95
The Cusco Low Initial TYPE RS
  • Low power loss means better lap times for even the mild tuned of cars
  • Chattering is kept low
  • Improved durability as clutch plates are low pressured
  • The LSD efficiency is higher with smoother oil flow between p...
$1311.95
This five point lower arm bar braces the chassis to the front control arms of your Evo X for reduced body roll and improved steering response.
$180.00
CUSCO proudly announces the release of "softer" sway bars for the EVO X (CZ4A).

A vehicle that is driven on a road surface other than concrete usually performs better with a softer suspension setup. A stronger sway bar is more ideal for concrete surfaces since it attempts to s...
$324.95
The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has al...
$195.95
Cusco’s sway bars are available for most applications on the front or rear of the vehicle. Reducing body roll during hard cornering is not the only feature that can be increased with these. Depending on the particular size and position of the sway bar, over-steer and under-steer can be modifi...
$324.95
The Cusco Type II lower arm bar features the same tubular high-tension lightweight aluminum design and anti-corrosion paint as the Type I. The difference though, is that this bar improves body rigidity by connecting the lower arm mounts in multiple positions rather than just two, thus greatly inc...
$180.00
The Cusco Front Center Power Braces for the 2008-2009 Lancer Evo X is a mulit-point, 2-part, longitudinal brace that is designed to strengthen the front/middle portion of the chassis and provides a noticable improvement in aggressive cornering.
$324.95
The Cusco Front Floor Power Brace for the 08-09 Evo X connects the left and right sides of the front section of the chasis using a multi-point lateral brace.
$264.60
The Cusco Front Rear Side Power Braces connect two points on each side of the chassis under the rear doors. These longitudinal braces are the most foward in the chassis of Cusco's rear braces.
$151.95
After the installation of the pillow ball bushing kit you will notice improved cornering accuracy and stability of straight forward progress.
$276.30
After the installation of the pillow ball bushing kit you will notice improved cornering accuracy and stability of straight forward progress.
$448.95
Cusco Power Braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts.

Fits: Mitsubishi Lancer Evolution X

Part # 566 492 C
$336.60
Cusco Power Braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts.

Fits: Mitsubishi Lancer Evolution X

Part # 566 492 C
$336.95
The Cusco Power front braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts. Remove the oringal cover to use.

Fits: Mitsubishi Lancer Evolution X
...
$264.60
The Cusco Power front braces stiffen your EVO X and improve handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts. Remove the oringal cover to use.

Fits: Mitsubishi Lancer Evolution X
<...
$264.95
The Cusco Power floor brace stiffen's your EVO X and improves handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts.

Fits: Mitsubishi Lancer Evolution X

Part # 566 492 FR
$169.95
The Cusco Power Rear Member brace stiffen's your EVO X and improves handling by attaching key portions of the chassis to each other.

TECH TIP: Bolt-on installation, using factory holes, bolts and nuts. Rear-Side Requires minor insulator modification.

Fits: Mitsubishi La...
$177.95
The Cusco Rear Member Power Brace for the Evo X is multi-point, 2-part brace kit that is replaces an OEM brace and helps to tie the rear suspension mounting points to the chassis.
$259.95
This lateral Cusco 08-09 Evo X brace installs above the exhaust and provides multi-point stiffening, but does require trimming of the OEM heatsheild.
$162.95
These left and right Cusco Evo X braces connect the rear suspension to the rear section of the chassis for improved stiffness.

***This part will NOT fit on the USDM EVO X Chassis***
$151.95
CUSCO proudly announces the release of "softer" sway bars for the EVO X (CZ4A).

A vehicle that is driven on a road surface other than concrete usually performs better with a softer suspension setup. A stronger sway bar is more ideal for concrete surfaces since it attempts to s...
$289.95
The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The aluminum bar possesses high rigidity due to the two different designs available. The Type 1 is pressed ribbed while the Type 2 is sectioned. Cusco has al...
$316.95
Cusco’s sway bars are available for most applications on the front or rear of the vehicle. Reducing body roll during hard cornering is not the only feature that can be increased with these. Depending on the particular size and position of the sway bar, over-steer and under-steer can be modifi...
$289.95
Provides ventilation to the inside of the vehicle where open windows are prohibited during competition.
Easily mounts between window and frame on rear windows.
Ventilates while keeping dirt out for full rally competition use.
High grade aluminum material, painted black.
Co...
$276.30
Tired of the goofy looking RC Car antenna on the back of your car? Shrink it down with this Cusco Short Antenna. This antenna just screws in place of your stock antenna giving your car a much needed visual upgrade.

Cusco says this antenna may cause a slight loss of reception if you a...
$35.95
This coilover kit is designed for daily street use as well as the weekend track. The 24 way adjustable strut is extremely flexible and can be set to each user preference and style of driving.

The all new EVO X Zero-3S features:
$2622.00
Cusco presents a renewed version of their Tow Hooks featuring a new swivel design! The tow hooks can be folded 90 degrees when not in use and will also minimize injuries from protruding hooks for people walking around the vehicle.

Fits: Lancer EVO X

Part# 566 017 R
$124.95
Cusco Zero-1 Coilovers are for those looking for a high-quality coilover offering adjustable ride height without affecting spring preload. This will allow for proper corner-weighting for the ultimate handling experience. Furthermore, you do not have to give up any suspension stroke to change ...
$1817.95
Cusco Zero-1 Coilovers are for those looking for a high-quality coilover offering adjustable ride height without affecting spring preload. This will allow for proper corner-weighting for the ultimate handling experience. Furthermore, you do not have to give up any suspension stroke to change ...
$1955.95

The all new Zero-2E system. With all the same benefits and features as the Zero-2 coilover, the Zero-2E adds the option to electronically control the shock adjustment from inside the car. Utilizing the E-Con ,you can select what stage (of 5) you want the shock set at.

$2688.30

CUSCO presents the ZERO-3G line of suspension coilovers. These competition use suspension system is developed from data and experience taken from our involvement in various professional world class motorsports.

The Gravel spec series are designed most ideal for the use in:
$2737.95