BBS SR 18x8 5x114.3 ET50 Satin Black Diamond Cut Face Wheels -82mm PFS/Clip Required
Part # bbsSR023VGPK
Size: 18x8
Offset: 50mm
Bolt Pattern: 5x114.3
Weight: 29 lbs. Each
Sold as set of 4.
$1141.95
BBS SR 18x8 5x114.3 ET50 Satin Grey Wheels -82mm PFS/Clip Required
Part # bbsSR023SG
Size: 18x8
Offset: 50 mm.
Bolt Pattern: 5x114.3
Weight: 29 lbs. Each
Sold as set of 4.
$1023.95
BBS SR 19x8.5 5x114.3 ET45 Satin Black Diamond Cut Face Wheels -82mm PFS/Clip Required
Part # bbsSR029VGPK
Size: 19x8.5
Offset: 45mm
Bolt Pattern: 5x114.3
Weight: 34 lbs. Each
Sold as set of 4...
$1535.95
BBS SR 19x8.5 5x114.3 ET45 Satin Grey Wheels -82mm PFS/Clip Required
Part # bbsSR029SG
Size: 19x8.5
Offset: 45 mm.
Bolt Pattern: 5x114.3
Weight: 34 lbs. Each
Sold as set of 4.
$1456.95
BBS SX 17x7.5 5x114.3 ET42 Crystal Black Wheels -82mm PFS/Clip Required
Part # bbsSX0305CB
Size: 17x7.5
Offset: 42 mm.
Bolt Pattern: 5x114.3
Weight: 30 lbs. Each
Sold as set of 4.
$806.95
BBS SX 17x7.5 5x114.3 ET42 Sport Silver Wheels -82mm PFS/Clip Required
Part # bbsSX0305SK
Size: 17x7.5
Offset: 42 mm.
Bolt Pattern: 5x114.3
Weight: 30 lbs. Each
Sold as set of 4.
$806.95
BBS SX 18x8 5x114.3 ET40 Crystal Black Wheels -82mm PFS/Clip Required
Part # bbsSX0104CB
Size: 18x8
Offset: 40 mm.
Bolt Pattern: 5x114.3
Weight: 34 lbs. Each
Sold as set of 4.
$1003.95
BBS SX 18x8 5x114.3 ET40 Sport Silver Wheels -82mm PFS/Clip Required
Part # bbsSX0104SK
Size: 18x8
Offset: 40 mm.
Bolt Pattern: 5x114.3
Weight: 34 lbs. Each
Sold as set of 4.
$1003.95
BBS SX 19x8.5 5x114.3 ET45 Crystal Black Wheels -82mm PFS/Clip Required
Part # bbsSX0505CB
Size: 19x8.5
Offset: 45 mm.
Bolt Pattern: 5x114.3
Weight: 33 lbs. Each
Sold as set of 4.
$1515.95
BBS SX 19x8.5 5x114.3 ET45 Sport Silver Wheels -82mm PFS/Clip Required
Part # bbsSX0505SK
Size: 19x8.5
Offset: 45 mm.
Bolt Pattern: 5x114.3
Weight: 33 lbs. Each
Sold as set of 4.
$1515.95
BBS XA 18x8.5 5x114.3 ET45 Satin Black Diamond Cut Face Wheels -82mm PFS/Clip Required
Part # bbsXA0205BPK
Size: 18x8.5
Offset: 45 mm
Bolt Pattern: 5x114.3
Weight: 31 lbs. Each
Sold as set of 4.
$1239.95
BBS XA 19x8.5 5x114.3 ET45 Satin Black Diamond Cut Face Wheels -82mm PFS/Clip Required
Part # bbsXA0104BPK
Size: 19x8.5
Offset: 45 mm
Bolt Pattern: 5x114.3
Weight: 32 lbs. Each
Sold as set of 4.
$1476.95
* 53mm Dampers (Larger then the Competition)
* Fixed Cup/Locking Collar Design (Unlike cheap coilovers, this feature will not change your ride heights, camber, or wear out your tires!)
* Full Pillowball Mounts in the Front & Rear. (where applicable)
...
$1397.95
BEATRUSH Engine Roll Stopper EVO X
$211.85
BEATRUSH Front Strut Bar EVO X
$298.00
Made for Japanese license plates; requires drilling on license plate.
Fits: Lancer EVO X
$57.00
The Beatrush Oil-Air Separator Catch Tank for Evolution X removes the
oil from the engine ventilation system so the oil does not get sent
through the intake system; while reducing pressure inside the crankcase
through discharged gases released through the oil cap. Overall, this
prov...
$384.75
Interior divider for those that don't have a rear seat. Perfect for
roll cage setups or roll bar EVO Xs that want a cleaner look.
***This item is special order and takes 6-8 weeks to ship
$419.95
In efforts to further improve the rigidity of the Evolution X, Beatrush developed a rear strut bar. The rear strut bar uses a hollow D-shaped aluminum shaft bent to conform with the body of the car and allows the wiper fluid/battery to remain in place.
Beatrush EVO X Strut Bar Feat...
$298.00
Beatrush Red Front Tow Hook for Evolution X
**Works with JDM Front Bumper Beam only**
$159.60
The Beatrush rear tow hook is a direct bol-on so no drilling or cutting
on bumper is required. This piece is durable and robust. Perfect for
track EVO Xs.
Comes with brackets and everything needed to install.
$228.95
5speed shift knob; made of duracon.
$56.05
6speed shift knob; made of duracon.
$56.05
Beatrush Shifter Base Bushings EVO X
$53.20
Made from stainless steel struts.
Nitrogen filled hood dampers are a functional and fashionable option for the
hood of your car.
Great for show cars or just the car enthusiast who likes to work under the hood.
Utilizes OEM mounting locations no drilling or modifica...
$70.00
Manufactured from real titanium, this is the satin version of our
titanium weighted shift knob. The titanium goes through a shaving
process, which makes the feel of the Blackline satin titanium shift knob
very unique in the hand. A heavier shift knob carries more kinetic
energy and moment...
$84.99
A complete Intake kit. Including the Carbon Air Duct, and the filter element.
This system will allow you to utilize the factory Cold air setup that forces
cool air from the front of the car into the intake system.
Fits: 08+ EVO X
Part# 27007
$1268.95
The BLITZ LM Intake System was design to reduce intake restriction and provide maximum filtration.
$169.95
By utilizing a 4 layer cotton filter, blitz has created an air filter that reduces air resistance, increases filtering efficiency and is very durable.
$409.95
Improve horsepower and gas mileage instantly!
$59.95
Instantly stabilizes boost pressure at high-rpm range!
$319.95
The stock rubber hose expands at boosting which decreases the efficiency of the boost pressure.
$587.95
The Blitz Venturi Drive Blow off Valve for the 08-09 Evo X relieves compressor
surge without reducing compressor speed. It controls boost pressure that is
built up by the turbo and vents it into the atmosphere when the car is not under
load (in between shifts).
This prev...
$265.95
BLOX Racing EVO X billet front lower engine motor mount is designed to reduce the amount of engine torque associated with hard
driving and shifting.
$84.95
Part # 002-00-001
Fits: EVO X
Battery Holder is specially designed for Mitsubishi EVO. The holder is made of CNC machined aluminum. It is available in natural aluminum, red or black anodized finish. It is designed to easily replace the original battery tie down and i...
$42.95
Part # 009-01-006
Fits: EVO X
A must for everyone using aftermarket fuel pressure regulators. It adapts standard EVO X fuel pressure regulator port to AN-6 threaded female port. 90 degree elbow. Available in red, black or natural finish.
$50.95
Boomba Mitsubishi EVO X Fuel Pressure Regulator Adaptor - Straight
Part # 009-02-006
Fits: EVO X
A must for everyone using aftermarket fuel pressure regulators. It
adapts standard EVO X fuel pressure regulator port to AN-6 threaded
fema...
$43.95
Part # 009-00-002
Fits: EVO X
Boomba Racing has developed a special high temperature insulating gasket
which replaces stock intake gasket. Turbocharged cars use aluminum
intercoolers to cool the air compressed by the turbocharger. Colder air
has lesser ...
$105.95
Part # 009-00-010
Fits: EVO X
Boomba Racing Evo X 75 mm throttle body is a direct replacement of the factory unit. Boomba 75 mm throttle body comes as a kit including stock manifold adaptor plate and 60 mm hose adaptor, which allows installation with factory intake ...
$488.95
Part # 009-21-010
Fits: EVO X
Adaptor plate that will allow mounting of EVO X 75 MM throttle body to aftermarket intake manifold with stock bolt pattern and 75 MM bore. Adaptor is CNC machined out of billet aluminum and is available in natural aluminum, red and black...
$60.95
Borla Performance has been manufacturing clever Cat-Back⢠and Header
systems for the Mitsubishi Evo since its inception.
$979.95
Borla XR-1 Turndowns/Turnouts:
These lightweight
high quality austenitic Stainless Steel XR-1 Turnouts are just 7 inches
long, with a tight radius - and designed to slip over the nipple on the
ex...
$85.85
The next performance level, Gran Turismo, is comprised 2-piece vented rotors
that are 14.9 inch cross-drilled and/or slotted. In the 2-piece system, billet
aluminum hats are application specific and have been individually machined to
engineering specifications.
The marria...
$4410.95
The next performance level, Gran Turismo, is comprised 2-piece vented rotors that are 13.5 inch cross-drilled and/or slotted. In the 2-piece system, billet aluminum hats are application specific and have been individually machined to engineering specifications.
The marriage of these ...
$3546.95
The next performance level, Gran Turismo, is comprised 2-piece vented rotors
that are 13.5 inch cross-drilled and/or slotted. In the 2-piece system, billet
aluminum hats are application specific and have been individually machined to
engineering specifications.
The marria...
$3546.95
Are you tired of warping your stock rotors?
Time to upgrade to brembo slotted brake rotors.
Brembo Sport slotted brake rotors are for drivers who want to improve
the looks and performance of their vehicle's original braking system...
$460.95